ISL71934MEVAL1Z Evaluation Board
●Key Features:
■Low Insertion Loss: 0.79dB (at 2 GHz)
■High Isolation: 67dB (at 2 GHz)
■Constant Impedance during switching
●Specifications:
■The ISL71934MEVAL1Z is intended to easily test the ISL71934M over all operating parameters.
■Frequency range from 50MHz to 6000MHz
■Supply voltage range: 2.75V to 5.25V
■Control logic range: 1.8V to 3.3V
●Functional Description:
■The ISL71934MEVAL1Z consists of three RF SMA connectors for the RF1, RF2, and RFC signals. The board contains a header for supplying VCC , GND, VCTL , and EN. A through path between J4 and J5 allows for calibration of the PCB board loss. The board does not contain DC blocking capacitors on the RF paths. External blocking capacitors are required if a DC voltage is present on the RF lines. Jumpers allow the VCTL and EN signals to be set to GND or to V CC. If the jumper is inserted, the signal is GND. If the jumper is removed, the signal is pulled high to VCC
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
Feb 11, 2021 |
|
|
Rev.1.0 |
|
|
X0119478 |
|
|
829 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
