82P33914 / 82P33914-1 Synchronization System for IEEE 1588
■IEEE 1588-2008 Precision Time Protocol (PTP) is a packet-based synchronization mechanism used in packet-switched networks. PTP synchronizes the clocks of different devices with the most accurate clock on the network – usually a precise, grandmaster clock, such as one using a Primary Reference Time Clock (PRTC) time signal. The 82P33914-1 is a software and hardware system that can operate as a PTP slave or PTP master. As a PTP slave the 82P33914-1 recovers accurate and stable electrical synchronization signals from a packet based reference generated by a PTP master. As a PTP master the 82P33914-1 can lock to a stable electrical clock source and generate packet based PTP references for downstream PTP slaves
■The 82P33914-1 is available with several software and hardware options. The software options are outlined in Table 1 by root part number. The hardware options depend on the choice of Synchronization Management Unit (SMU) hardware; the SMU hardware documentation is listed in Table 3 by root part number
●HIGHLIGHTS
■System implements ITU-T telecom profiles
■Composed of IDT’s IEEE 1588 software and IDT’s Synchronization Management Unit (SMU) hardware
■Operates as IEEE 1588 / PTP slave
■Recovers accurate and stable synchronization signals from packet based IEEE 1588 / PTP master
■Provides integrated physical layer frequency support
■Operates as an IEEE 1588 / PTP master
82P33914 、 82P33914-1 、 82P33914NLG 、 82P33914NLG8 、 82P33914-1NLG 、 82P33914-1NLG8 、 82P33914NLG/W 、 82P33914-1NLG/W |
|
[ Access routers ][ edge routers ][ core routers ][ Carrier Ethernet switches ][ Multiservice access platforms ][ PON OLT ][ LTE eNodeB ][ ITU-T G.8265.1 & G.8275.1 Telecom Profile clock synthesizer ][ ITU-T G.8273.2 Telecom Boundary Clock (T-BC) and Telecom ][ Time Slave Clock (T-TSC) ][ ITU-T G.8264 Synchronous Equipment Timing Source (SETS) ][ ITU-T G.8263 Packet-based Equipment Clock (PEC) ][ ITU-T G.8262 Synchronous Ethernet Equipment Clock (EEC) ][ ITU-T G.813 Synchronous Equipment Clock (SEC) ][ Telcordia GR-253-CORE Stratum 3 Clock (S3) and SONET Minimum Clock (SMC) ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN |
|
English Chinese Chinese and English Japanese |
|
April 5, 2017 |
|
Rev. 4 |
|
|
|
246 KB |
- +1 Like
- Add to Favorites
Recommend
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas‘ Semiconductor Manufacturing Factory (Naka Factory) Fire: Production Capacity Has Recovered to 88%
- Renesas Announces 10 New Winning Combinations Integrating Celeno and Renesas Products
- Renesas & Altran to Deploy First Social Distancing Wristwatch Using Ultra-Wideband Chipset with Low Rate Pulse
- Renesas and FAW Establish Joint Laboratory to Accelerate Development of Next-Generation Smart Vehicles
- Renesas Semiconductor Manufacturing Factory (Naka Factory)‘ Production Level Has Returned to 100%
- Renesas and Sequans Expand Their 5G Collaboration including Broadband IoT Module for 5G NR FR1/FR2
- Renesas and Cyberon Partner to Deliver Integrated Voice User Interface Solutions for Renesas RA MCUs Supporting Over 40 Global Languages
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.