Choosing a Crystal for VersaClock® 7 Devices
■This application note describes the crystal specifications requirements of VersaClock 7 devices. A list of recommended crystals and approved vendors is also provided.
■Introduction
●The VersaClock 7 RC310xxA/RC210xxA family relies on a crystal as the reference to the analog PLL. To achieve optimum performance for a given application, the selection of the crystal must consider the nature of the application as well as the specifications of the devices. For more details on the requirements for selecting a crystal for timing applications, see the Choosing the Right Crystal for Clocking Devices application note. This application note describes the requirements for selecting a crystal for the RC210xxA and RC310xxA family of devices. Refer to the latest datasheets (RC210xxA and RC310xxA) for up-to-date specifications of the VersaClock 7 crystal input.
|
|
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Nov 4, 2022 |
|
Rev.1.00 |
|
R31AN0029EU0100 |
|
295 KB |
- +1 Like
- Add to Favorites
Recommend
- Renesas Extends RA MCU Family with RA6T1 MCU Group for Motor Control and AI-based Endpoint Predictive Maintenance
- Renesas Extends Arm Cortex-Based MCU Family with RA4M3 MCU Group for Industrial and IoT Applications
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- The Past and the Future of Renesas RX Family Software
- Renesas Ships 1 Billionth Device From RX Family of 32-bit Microcontrollers
- Renesas Expands RA MCU Family with New RA4 Entry-Line Group Offering Optimal Value with Balanced Low Power Performance and Feature Integration
- Renesas‘ Semiconductor Manufacturing Factory (Naka Factory) Fire: Production Capacity Has Recovered to 88%
- Renesas Extends IoT Security Leadership With PSA Certified Level 2 and SESIP Certification for RA Family MCUs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.