RA4M2 Group Evaluation Kit for RA4M2 Microcontroller Group EK-RA4M2 v1 Errata
■This Errata describes the known issues and exceptions to the functional specifications for the EK-RA4M2 v1, Evaluation Kit for the RA4M2 MCU Group. For additional information on the kit, see the EK-RA4M2 v1 user’s manual.
●Description
■According to the following section in the RA4M2 Hardware User’s Manual, r01uh0892ej0101-ra4m2.pdf; 26.3.1.4 USB 2.0 Full-Speed Module (USBFS): Example external connection circuits, the series resistors R21 and R22 in the USB FS interface should have a value of 27 Ω. On affected boards R21 and R22 are fitted with 33 Ω resistors. The EK-RA4M2 v1 schematic reflects these incorrect values as can be seen in Figure 1.
RA4M2 Group 、 RA4M2 、 RA Family 、 RA4 Series 、 RA4 、 EK-RA4M2 |
|
|
|
Errata |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Oct.28.22 |
|
Rev.1.10 |
|
R20ZZ0224EG0110 |
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
- Renesas Expands Low-Power Industrial and IoT Applications Reach With New RA4M2 MCU Group in Arm Cortex-Based MCU Family
- Renesas Extends RA MCU Family with RA6T1 MCU Group for Motor Control and AI-based Endpoint Predictive Maintenance
- Renesas Extends Arm Cortex-Based MCU Family with RA4M3 MCU Group for Industrial and IoT Applications
- Renesas Extends IoT Security Leadership With PSA Certified Level 2 and SESIP Certification for RA Family MCUs
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas Expands RA MCU Family with New RA4 Entry-Line Group Offering Optimal Value with Balanced Low Power Performance and Feature Integration
- Renesas & Altran to Deploy First Social Distancing Wristwatch Using Ultra-Wideband Chipset with Low Rate Pulse
- Renesas and FAW Establish Joint Laboratory to Accelerate Development of Next-Generation Smart Vehicles
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.