MINV-4000-1U-180 Series Military-Grade Power Inverter
▲SynQor’s Military Inverter units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MINV incorporates field proven high efficiency designs and rugged packaging technologies. This MINV will accept a wide-range high-voltage DC input while delivering a well-conditioned continuous 4000 W, AC output to the load. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include a selection of output frequencies and configurations that provide a single output, three single-phase outputs, or a 3-phase output.
▲A communication/control port is available to permit monitoring and control by a host computer system. Front panel LEDs provide information on the status of the MINV.
▲The electronic circuitry within the MINV-4000 Series products is designed, qualified and screened according to SynQor’s MIL-COTS Standards. It complies with the requirements of MIL-STD-704F, MIL-STD-1399-300B, MIL-STD-1275D and MIL-STD-461F, as well as IEC-EN61000 specifications for world-wide commercial utility applications.
▲The MINV-4000 Series products are designed and manufactured to withstand the harsh environments and use encountered in military applications. The electronic circuitry is contained in a sealed chamber constructed from a die-cast aluminum chassis that is weather-proof and shock-proof. Redundant, water-proof fans on the rear panel draw cooling air over the heat-sink fins below the sealed chamber. Military-grade circular connectors are used, and optional attached connector covers are available for when the cables are not attached. The MINV-4000 Series products comply with a wide range of testing according to MIL-STD-810G.
▲The SynQor MINV-4000 Series products are designed and manufactured in the U.S.A
|
MINV-4000-1U-180 Series 、 MINV-4000-1U-180 、 MINV-4000-1U 、 MINV-4000 Series 、 MINV-4000 、 MINV 、 MINV-4000-1U-180-2F5S-E00 |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
09/29/16 |
|
|
REV A |
|
|
|
|
|
3.2 MB |
- +1 Like
- Add to Favorites
Recommend
- MAD180 series - 180W High Power Density Medical AC/DC power supply in a 2x3 inch package
- TAD180 series -180W High Power Density Industrial AC/DC power supply in a 2x3 inch package
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
- Silicon Labs Announces Next Generation Series 3 Wireless Platform to Create a Smarter, More Efficient IoT
- Shindengen Adds JH Series and MG038 Series Large Capacity Three Phase Bridge Diodes
- ONPOW New Series- ONPOW61 Push Button Switch With Connector that Covers 16mm, 19mm, 22mm, and 25mm in Diameter
- Conductive Polymer Hybrid Aluminum Electrolytic Capacitors 80V products added to the HXA/HXB Series Radial lead type HSA/HSB Series commercialized
- Yangtze Microelectronics Introduces Integrated Inductors FTC Series and FEXL Series with a Thickness of 0.55mm
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
