CH7016A SDTV / HDTV Encoder
■The CH7016A is a Display Controller device which accepts a digital graphics input signal, and encodes and transmits data through a 10-bit high speed DAC. The device is able to encode the video signals and generate synchronization signals for NTSC and PAL TV standards (SDTV), as well as analog HDTV interface standards and graphics standards up to UXGA. The device accepts data over one 12-bit wide variable voltage data port which supports 5 different data formats including RGB and YCrCb.
■The TV-Out processor will perform non-interlace to interlace conversion with scaling and flicker filter, and encode data into any of the NTSC or PAL video standards. The scaling and flicker filter is adaptive and programmable to enable superior text display. Eight graphics resolutions are supported up to 1024 by 768 with full vertical and horizontal under-scan capability in all modes. A high accuracy low jitter phase locked loop is integrated to create outstanding video quality. ITU-R BT.656 interlaced video can also be input and scan converted to non-interlaced video.
■In addition to TV encoder modes, bypass modes are included which perform color space conversion to HDTV standards and generate and insert HDTV sync signals, or output VGA style analog RGB for use as a CRT DAC.
●Features
■VGA to SDTV conversion supporting graphics resolutions up to 1024x768
■Analog YPrPb output for HDTV
■HDTV support for 480p, 576p, 720p, 1080i and 1080p
■Programmable digital input interface supporting RGB and YCrCb input data formats
■True scale rendering engine supports under-scan in all TV output resolutions
■Text enhancement filter
■Adaptive flicker filter with up to 7 lines of filtering
■Interlaced to progressive scan conversion for DVD
■Support for NTSC, PAL and HDTV formats
■Support for SCART connector
■Outputs CVBS, S-Video, RGB and YPrPb
■Support for Wide Screen Signaling (WSS)
■TV / Monitor connection detect
■Programmable power management
■Four 10-bit video DAC outputs
■Fully programmable through serial port
■Complete Windows and DOS driver support
■Low voltage interface support to graphics device
■Offered in a 48-pin LQFP package
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
LQFP |
|
|
English Chinese Chinese and English Japanese |
|
|
1/7/2014 |
|
|
Rev. 1.2 |
|
|
201-0000-100 |
|
|
727 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
