Senseair Aercast: Battery powered and wireless IAQ Monitor
●Thanks to the ultra-low power sensor, the Senseair Aercast is possible to run on batteries for at least 2 years, depending on the actual configuration.
●The measured data is shown on a high resolution display and the overall indoor air quality is intuitively indicated by the stylish LED elements. The data is wirelessly transmitted using an open protocol and can be viewed using a laptop dashboard or a smart phone app.
●Senseair Aercast is provided as a white-label product that could be branded with your own logotype. The product complies with ASHRAE standard 189.1(±50 ppm @ 1000 ppm of measured CO₂ value).
▲Maintenance free ¹
▲3 sensors in one housing
▲Battery-powered
▲IoT connected using the market's leading radio interfaces
▲ IAQ indication on display as well as intuitive LEDs
▲Available as a white-label product
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/4/7 |
|
Rev: 4 |
|
PSH6623 |
|
422 KB |
- +1 Like
- Add to Favorites
Recommend
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- The Installation Advantages, Structural Features and Product Applications of WAGO‘s 2273 Series Compact Wire Connectors ∣ Video
- Greenconn荣获邓白氏企业认证,实力彰显行业领先水平
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
- Crocus’ XtremeSense® TMR CT81xx Sensors: a Combination of High Sensitivity, Low Power and Small Footprint for Medical Wearables Applications
- High-sensitivity Crocus XtremeSense® TMR Sensors Solves Tamper Detection, with Less Susceptibility to Temperature Change
- Crocus Technology Introduced its Second Generation XtremeSense™ TMR 2D Angular Sensor CT310
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.