BExS110D;BExS120D;BExDS110D AND BExDS120D LINE MONITORING EOL AND DIODE SCHEMATIC DIAGRAM
● On BExS110D ; BExS120D ; BExDS110D ; BExDS120D DC units, DC reverse line monitoring can be used as required.
● All DC sounders have a blocking diode fitted in their supply input lines. An end of line monitoring diode or an end of line monitoring resistor can be connected across the +ve and -ve terminals.
● If an end of line resistor is used it must have a minimum resistance value of 3k30 and a minimum power rating of 0.5 watts or a minimum resistance value of 500Ω and a minimum power rating of 2 watts.
● The resistor must be connected directly across the +ve and -ve terminals as shown in the following drawing. The resistor leads should be kept as short as possible.
|
|
Outline Dimension Drawing |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
23-09-2016 |
|
ISSUE A |
|
SK0444 |
|
265 KB |
- +1 Like
- Add to Favorites
Recommend
- Yint Electronics Complete Electromagnetic Compatibility Solution for Brushless Motor Electronic Control
- RF-star’s Development Kits of CC2340 BLE Modules Accelerate Projects
- EOL Announcement--- P-DUKE LED15-xxS3P3 / LED15-xxS05
- SSD End-of-Life Validation Test: Ensuring Reliability, Endurance and Retention From 0% to 100% and Beyond EOL
- Melexis Adds MLX90823/25 to Completes its PCB-less Pressure Sensor IC Platform, Demonstrating Advanced Accuracy Performance in Automotive Industry
- ATP’s Obsolescence Management Strategy Drives Long-Term Supply Stability and Flexibility
- Development of Snap-in Type Aluminum Electrolytic Capacitors KVS/LVS Series Vibration Resistant Products for On-board Chargers
- Alliance Memory Offered Discontinued Cypress Semiconductor CY62256 Low Power SRAMs With Original Part Numbers Into 2019
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.