A-1230 SD GEARMOTORS
■torque rating: Up to 300 oz. in. maximum continuous torque
■weight: 4 to 5 ounces depending on ratio
■gears: Planetary gearing system. All gears are heat treated for consistently reliable performance and long life
■shaft:
▲Precision-ground No. 416 stainless steel. Options: length, smaller diameter, flats, pinions, gears, holes (through or tapped), threaded ends and tapers. Type of steel used may change depending upon variation selected
■backlash: Varies with reduction but average unit will have less than 3°
■gear inertia: 1.8 x10⁻⁶ oz. in. see.²® input max
■bearings: Output shaft uses double-shielded life-lubricated ball bearings for -55°C to +85°C operation. Special lubricants available for temperature extremes
■cables/leads: 8" #26 AWG leads per MIL-W-16878/4
■housing: Aluminum
■mounting flange: No. 303 stainless steel per ASTM A582
■gear train housing: Stress-proof steel
■marking: Per MIL-STD-130
■life: 1,000 hours continuous duty for 27 VDC units
■options available:
▲RFI filters to meet MIL-l-6181, MIL-l-26600 or MIL-STD-46'
▲Internal slip clutch
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
August 11, 2015 |
|
|
|
|
|
465 KB |
- +1 Like
- Add to Favorites
Recommend
- SANYO DENKI Develops SANMOTION C S500 Series Motion Controller That Can Control 7-Axis Articulated Robots
- SANYO DENKI Develops SANMOTION C S200 Motion Controller for Monitoring and Maintenance of Equipment
- TDK Launches SmartMotion™ Ultra-high-performance 6-axis Motion Sensor ICM-45xxx with World’s First BalancedGyro™ Technology
- TDK’s New SmartMotion® Platform Accelerates Development of IOT Solutions Based on Invensense Motion Sensors
- How SANMOTION Motion Controllers Enable Real-Time Monitoring for Industry 4.0
- Unimotion STDL-PN Profinet Drive Providing Modern and Powerful Motion Control Solutions
- SANYO DENKI Expands Its Lineup of SANMOTION G Servo System, Which Offers “Powerful“ and “Friendly“ Features
- Coherent Introduces New HIGHmotion 2D Laser Processing Head Optimized for Deep Copper Welds Over Wide Working Areas in EV Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.