MHF® I Connector (Plug: 2.00 Type) Part No. Plug: 20767-001R-20 Receptacle: 20279-001E-** Test Report
■To evaluate the performance of MHF I Connector in accordance with PRS-2490.
●Specimen
■(1) MHF I PLUG (Part No: 20767-001R-20)
▲Cable:AWG#26 coaxial cable (Jacket diameter 2.00mm)
■(2) MHF I RECEPTACLE (Part No: 20279-001E-**)
●Test Sequence
■All the evaluations were performed in accordance with Table 1.Test Sequence.
●Result
■See Table 2-1 to 2-3, Graph 1 to 18. For the details of the testing conditions and requirements, see PRS-2490.
■The “n” in the tables show the number of measurement points.
●Conclusion
■All the specimens met the requirements of PRS-2490.
Connector 、 Plug 、 Receptacle |
|
|
|
Test Report |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
June 26, 2018 |
|
Rev. 0 |
|
TR-18041 |
|
2.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Miniaturized Low-Loss U.FL and MHF Pigtail Cable Assembly Enables Low-loss RF Signal Transmission for Cables Inside Devices
- The Differences between IPEX Generations I, II, and III
- NOVOSENSE Launched the Latest Automotive-qualified Chips - I²C GPIO Extension, Half-bridge Driver, Three-state Buffer
- InvenSense Announces World’s Smallest, Lowest Power I²S Microphone ICS-43434 for IoT and Wearable Markets
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- Highly Compact Mini Analog Pro Ex i signal conditioners with SIL 3 win the Gold German Innovation Award 2023
- Level Shift RS0102 Provides Dual Data Lines, Which Are Mainly Used for Communication Interfaces Such as UART, I²C, SMBus, and GPIO
- What Size FPV Drone Should I Get?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.