Termination Boards for HART® multiplexing INSTRUCTION MANUAL
■Termination Boards are installed onto standard EN/IEC60715 TH 35 DIN-Rail located in Safe Area or Zone 2, Group IIC, Temperature T4 Hazardous Area within the specified operating temperature limits Tamb ‑40 to +70 °C. Termination Boards must be installed, operated and maintained only by qualified personnel, in accordance to the relevant national/international installation standards (e.g. EN/IEC60079-14 Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines)), following the established installation rules. De‑energize power source (turn off power supply voltage) before plugging or unplugging the terminal blocks when installed in Hazardous Area or unless area is known to be nonhazardous.
■For hazardous location, TBE-D5001-HRT-003, TBE-D5001-HRT-xxx series shall only be installed in an interlocked enclosure. As an alternative the enclosure shall carry the following warning marking: "Warning - do not remove or replace fuse when energized".
■Explosion Hazard: to prevent ignition of flammable or combustible atmospheres, disconnect power before servicing or unless area is known to be nonhazardous
|
TBE-D5001-HRT-003 、 TBE-D5001-HRT-004 、 TBE-D5001-HRT-005 、 TBE-D5001-HRT-006 、 TBE-D5001-HRT-007 |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/4/6 |
|
|
|
|
|
ISM0535-2 |
|
|
7.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
