TB and TBE series Ex Safety Instruction Manual

PublishTime：2021-09-17

TB and TBE series are apparatus installed into standard EN/IEC60715 TH 35 DIN-Rail located in Safe Area or Zone 2 within the specified operating temperature limits (for complete details please refer to table 1). They can be mounted with any orientation over the entire ambient temperature range. The end user is responsible to ensure that the operating temperature of the module is not exceeded in the end use application. Units must be protected against dirt, dust, extreme mechanical (e.g. vibration, impact and shock) and thermal stress, and casual contacts. Electrical connections are accommodated by polarized removable screw terminal blocks or fixed terminal blocks and customer dedicated connectors which can be plugged in/out into a powered unit without suffering or causing any damage. Connect only one individual conductor per each clamping point, use conductors suitable for size of each terminal block. Use only cables that are suitable for a temperature of at least 85°C. The wiring cables have to be proportionate in base to the current and the length of the cable. TB and TBE series must be installed, operated and maintained only by qualified personnel, in accordance to the relevant national/international installation standards (e.g. EN/IEC60079-14 Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines)), following the established installation rules. According to EN/IEC61010, TB and TBE power supplies must be connected to SELV or SELV-E supplies. All circuits connected to TB and TBE must comply with the overvoltage category II (or better) according to EN/IEC60664-1. Failure to properly installation or use of the equipment may risk to damage the unit or severe personal injury. For those models having a relay output: connect relay contacts checking the load rating to be within the contact maximum rating. To prevent relay contacts from damaging, connect an external protection (fuse or similar), chosen according to the relay breaking capacity diagram from installation instructions (for complete details please refer to table 2, if present). For those models having a transistor output: connect transistor contacts checking the load rating to be within the contact maximum rating (for complete details please refer to table 2, if present). For those models having contacts rated more than 50 Vac or 75 Vdc: de-energize main power source (turn off power supply voltage) and disconnect plug-in terminal blocks before opening the enclosure to avoid electrical shock when connected to live hazardous potential. Storage: If the unit is not installed directly on a system (parts for spare or expansion with long storage periods), it must be conveniently stocked. Stocking area characteristics must comply with the following parameters: temperature -45 to +80°C; humidity 0 to 95%. Vibration: no prolonged vibration should be perceivable in the stocking area to avoid loosening of parts or fatigue ruptures of components terminals. Pollution: presence of pollutant or corrosive gases or vapours must be avoided to prevent corrosion of conductors and degradation of insulating surfaces.

Brand of Product：	GM INTERNATIONAL
Part#：	TBE-D5001-HRT-003 series 、 TBE-D5001-HRT-004 series 、 TBE-D5001-HRT-005 series 、 TBE-D5001-HRT-006 series 、 TBE-D5001-HRT-007 series 、 TBE-D5001-HRT-003 、 TBE-D5001-HRT-004 、 TBE-D5001-HRT-005 、 TBE-D5001-HRT-006 、 TBE-D5001-HRT-007 、 TB 、 TBE 、 TBE series 、 TB series 、 TB-D5008-INV-005 、 TBE-D5008-TRI-001 、 TBE-D5016-TRI-001 、 TBE-D5016-TRI-002 、 TBE-D5016-TRI-003 、 TBE-D5016-TRI-004 、 TBE-D5016-TRI-005 、 TBE-D5016-TRI-006 、 TB-D5016-TRI-010 、 TBE-D5016-TRI-007 、 TBE-D5016-TRI-008 、 TBE-D5016-TRI-009 、 TBE-D5016-TRI-011 、 TBE-D5016-TRI-012 More Part#
Product Category：	More
Application：	More
Data Type：	User's Guide More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2021/07/24
Version Number：
Data Encoding：	ISM0529-1
Data Size：	1.8 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits