KTD2686 Three-Channel Flash LED Driver with Independent Current Control
●KTD2686 is the ideal power solution for high-power flash LEDs. It includesa highly integrated synchronous boost converter,two current sourcesand one current sink, providing a very small total solutionin portable application. It has both I²C interface and hardwareSTROBE/TORCH pins for maximum control flexibility.The two integrated current sourcesand one current sink are independently controlled, theiron/offconditionsand current settings in Flash/Torch/IR modes can beprogrammed independently by the I²C interface. It also hasthree select able input low voltage protection modesto preventa system resetunder low battery condition.Thermal regulation is also integrated to limit the IC temperatureand continuously provide the maximum output current.
●Various protection features are integrated into KTD2686, including cycle-by-cycle input current limit protection, output over-voltage protection, LED fault (open or short) protection, flash timeout protection and thermal shutdown protection.
●KTD2686 is availablein a RoHS and Green 12-ball1.42mm x 1.66mm WLCSPpackagewith 0.4mm pitch.
▲Features
●High efficiency synchronous boost converter with 2MHz/4MHz switchingfrequency option
●I²C interface programming and hardware STROBE/TORCH control
●Two current sourcesand one current sink
◆LED1: Up to 1.5A (7bits)
◆LED2: Up to 1.0A (6bits)
◆LED3: Up to 0.5A (6 bits)
◆Flash/Torch/IR modes
◆IndependentLED on/off and current settings
◆Programmable rampshape and timecontrol
◆Threeinputlowvoltage protectionmodes
◆Flash time-out protectionup to 1.44s
◆LED cathode groundconnection for improved thermal dissipation(LED1/LED2)
●LED open/short protection
●I2Cfault read back(I2C address = 0x63)
Three-Channel Flash LED Driver with Independent Current Control 、 Flash LED Driver |
|
[ Smartphones Camera Flash ][ Digital Cameras ][ Tablets Camera Flash ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
WLCSP-12 |
|
English Chinese Chinese and English Japanese |
|
2020-08 |
|
Revision 04b |
|
|
|
96 KB |
- +1 Like
- Add to Favorites
Recommend
- Kinetic Releases Higher Current, Triple Channel Camera Flash Driver IC KTD2686 with Independent LED Control
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.