KTD2686 Three-Channel Flash LED Driver with Independent Current Control Datasheet Brief
●Brief Description
■KTD2686 is the ideal power solution for high-power flash LEDs. It includes a highly integrated synchronous boost converter, two current sources and one current sink, providing a very small total solution in portable application. It has both I²C interface and hardware STROBE/TORCH pins for maximum control flexibility. The two integrated current sources and one current sink are independently controlled, their on/off conditions and current settings in Flash/Torch/IR modes can be programmed independently by the I²C interface. It also has three selectable input low voltage protection modes to prevent a system reset under low battery condition. Thermal regulation is also integrated to limit the IC temperature and continuously provide the maximum output current.
■Various protection features are integrated into KTD2686, including cycle-by-cycle input current limit protection, output over-voltage protection, LED fault (open or short) protection, flash timeout protection and thermal shutdown protection.
■KTD2686 is available in a RoHS and Green 12-ball 1.42mm x 1.66mm WLCSP package with 0.4mm pitch.
●Features
■High efficiency synchronous boost converter with 2MHz/4MHz switching frequency option
■I²C interface programming and hardware STROBE/TORCH control
■Two current sources and one current sink
▲LED1: Up to 1.5A (7 bits)
▲LED2: Up to 1.0A (6 bits)
▲LED3: Up to 0.5A (6 bits)
▲Flash/Torch/IR modes
▲Independent LED on/off and current settings
▲Programmable ramp shape and time control
▲Three input low voltage protection modes
▲Flash time-out protection up to 1.44s
▲LED cathode ground connection for improved thermal dissipation (LED1/LED2)
■LED open/short protection
■I²C fault read back (I²C address = 0x63)
[ Smartphones Camera Flash ][ Tablets Camera Flash ][ Digital Cameras ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
WLCSP;WLCSP-12 |
|
English Chinese Chinese and English Japanese |
|
December 2017 |
|
Revision 04a |
|
|
|
199 KB |
- +1 Like
- Add to Favorites
Recommend
- Kinetic Releases Higher Current, Triple Channel Camera Flash Driver IC KTD2686 with Independent LED Control
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.