Model 7002 Switch System Instruction Manual
●This section contains general information about the Model 7002 Switch System.
■Features
●Some important Model 7002 features include:
● High Density Switching Up to 400 channels (or matrix cross points) per mainframe using 10 switching cards.
● Switching Cards In addition to the switching cards designed specifically for the Models 7001 and 7002 (i.e.Models 7011, 7012, 7013 and 7014), you can use the switching cards that were originally designed for the Keithley Models 705 and 706 scanners.
● Analog Back plane Can be used to internally connect the rows or banks of a Model 701X series card installed in one slot to the rows or banks Model 701X series cards installed in the other slots.
● Close/Open or Scan The Model 7002 can simply close and/or open one or more channels, or scan through a specified list of channels
● Channel LED Display The real-time LED display monitors the state (closed or open) of all available channels.
● Memory Up to 500 channel patterns (pattern of open and closed channels) and 10 customized instrument set-ups can be saved in memory for later recall.
● IEEE-488 Bus Bus operation conforms to the IEEE-488.2 and SCPI standards.
● Trigger Link New trigger concept to provide more versatile and precise external triggering. This is in addition to the standard in/out BNC external triggering technique.
● An optional light pen provides point and click programming from the front panel.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
January 2002 |
|
Rev. D |
|
7002-901-0 |
|
4.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.