SmartWORKS™ PCM32 Passive/Terminate Card
●OPTICALLY ISOLATED
■The front end of the cards have been designed with a standard RS485 electrical interface that is optically isolated from the board.
●PROGRAMMABLE TRUNK IMPEDANCE
■An API has been included in the SmartWORKS API to control trunk impedance which is configured on a per trunk basis. Trunk impedance is switchable between Hi-Z and 120 Ohm.
●PROGRAMMABLE IDLE CODING FORMAT
■Software selectable idle coding format: µ-law,A-law (terminate setting only).
●ON-BOARD DSP TO COMPLETE VOICE PROCESSING
■Encoding capabilities, with a rich set of CODECS, reduces the need to purchase other hardware components.
●CODEC SUPPORT
■SmartWORKS™ products offer a large selection of voice CODECS, (including G.723.1, G.729A and MS GSM)
●PCM INTERFACE
■The electrical interface conforms to RS485 specifications. Each trunk processes up to 32 channels, with a maximum of 512 channels per system. The SmartWORKS PCM supports programmable trunk impedance, coding format, frame sync. and signal configuration through the SmartWORKS™ API.
●BUILT IN PERFORMANCE MONITORING
■Event driven alarms are reported for loss of synchronization. This feature is enabled through the SmartWORKS API.
●COMMON SMARTWORKSTM API FEATURES
■Media Control - CODECS
■Tone Detection / Generation
■CallerID/FSK/DTMF/MF Detection
■Activity / Silence Detectors
■Switching (H.100 and MVIP)
■Automatic Gain Control (AGC)
■Automatic Volume Control (AVC)
■Stereo Recording with AGC
■Echo Cancelation
■Call Progress Monitoring (CPM)
■Full-duplex Channels
■Media Streaming
■Live Monitoring
■Start/Stop Call Recording Triggers
PCM32 、 PCM3209 、 PCM6409 、 PCM6409-EH 、 910-0330-001 、 910-0329-001 、 910-0702-001 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
05/09 |
|
V.4 |
|
LTRM-20045 |
|
290 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.