Charging Connectors Compatible with The CCS Type-2 EV Fast Charging Standard KW04 Series
■The KW04 Series is an Electric Vehicle (EV) charging connector compatible with the CCS(Combined Charging System) Type-2 electric vehicle fast charging standard. The product meets the European Conformity safety standards and is CE certified.
■Charging connectors that have reached their product life span have to be totally replaced. The KW04 has been designed in a way that allows for replacement of the plug interface only. Replacement of the interface can be done while the cable is attached to the charge unit.
■In addition, as a safety precaution, a double insulation structure has been adopted to protect the live components inside the connector from water ingress, so short circuit can be prevented even if the exterior is breached or damaged in anyway by unexpected accidents.
■*The cable of this product contains PIP (3:1), a substance banned under the U.S. Environmental Protection Agency (EPA), Toxic Substances Control Act (TSCA) regulation.
●Features:
■Compatible with the fast-charging standard CCS Type-2
■CE-Marking (IEC62196-3 Compliance, Certification Organization: TÜV Rheinland)
■Structure with replaceable engagement area
■Safety design with waterproof protection of live parts inside the connector
■Highly reliable design using environmentally resistant materials
KW04 Series 、 KW04 、 KW04GY05PDL****H 、 KW04GY05PDL0500H 、 KW04GY05PDL0500P |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Dec. 2021 |
|
|
|
MB-0352-3 |
|
585 KB |
- +1 Like
- Add to Favorites
Recommend
- OWON Has Demonstrated its XSA1000 Series, OWP-H, SPE Series, XDM Series in the 2023 Hong Kong Electronics Show
- Silicon Labs Announces Next Generation Series 3 Wireless Platform to Create a Smarter, More Efficient IoT
- Shindengen Adds JH Series and MG038 Series Large Capacity Three Phase Bridge Diodes
- ONPOW New Series- ONPOW61 Push Button Switch With Connector that Covers 16mm, 19mm, 22mm, and 25mm in Diameter
- Conductive Polymer Hybrid Aluminum Electrolytic Capacitors 80V products added to the HXA/HXB Series Radial lead type HSA/HSB Series commercialized
- Yangtze Microelectronics Introduces Integrated Inductors FTC Series and FEXL Series with a Thickness of 0.55mm
- Nippon Chemi-Con Developed Snap-in Type Aluminum Electrolytic Capacitors RLB Series with High Ripple and RLA Series with Longer Life
- The Difference between LiMnO2 Button Battery CR Series and CR/PH Series
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.