TX6000™ Enhanced Category 6 U/UTP Copper Cable – North America SPECIFICATION SHEET
■Category 6 cable shall exceed ANSI/TIA-568-C.2 and IEC 61156-5 Category 6 component standards. The conductors shall be 23 AWG construction with FEP/polyolefin (CMP) insulation. The copper conductors shall be twisted in pairs, separated by a cross-divider and covered by a low smoke, flame-retardant (CMP) jacket or a flame-retardant (CMR) jacket.
●key features and benefits
■Third party tested
▲Cable has been tested as part of the TX6000™ Copper Cabling System by an independent laboratory and complies with the electrical channel requirements of the following standard: ANSI/TIA-568-C.2 Category 6
■Guaranteed channel performance above the standards
▲Industry leading guaranteed channel performance above the TIA/ISO standards with head room guaranteedIntegrated pair divider
▲Separates pairs for exceptional cable performance
■Reelex™ packaging
▲Ensures proper performance and provides quick installation
■Tested beyond the standards
▲Cable has been characterized to 550 MHz, 300 MHz above the standardExtended temperature range
▲Allows operation in 90°C (194°F) ambient environment providing error-free performance in high-density cabinets and large cable bundles running PoE+ or PoE++ applications
■Descending length cable markings
▲Easy identification of remaining cable reduces installation time and cable scrap
PUP6004*-WLP 、 CJ688TG** 、 UTPSP3***Y 、 DPA24688TGY 、 UTPSP1M^Y 、 DPA48688TGY 、 DP12688TGY 、 DP24688TGY 、 DP48688TGY |
|
UTP Copper Cabling System 、 UTP Copper Cable 、 PLUS UTP Patch Cords 、 PLUS Angled Punchdown Patch Panels 、 PLUS Flat Punchdown Patch Panels 、 PLUS Category 6 Punchdown System |
|
[ Ethernet 10BASE-T ][ 100BASE-T (Fast Ethernet) ][ 1000BASE-T (Gigabit Ethernet) ][ 10GBASE-T (industry 10GBASE-T standards) ][ 155 Mb/s ATM ][ 622 Mb/s ATM ][ 1.2 Gb/s ATM ][ Token Ring 4/16 ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
11/2017 |
|
|
|
COSP422--WW-ENG |
|
349 KB |
- +1 Like
- Add to Favorites
Recommend
- Automotive-grade TVS diode UATxP series, P600 package, used for load dump protection of vehicle power supply system
- Why Cables and Connectors Are Critical to the Power And Data Transmission Needs Of Industry’s Digital Transformation?
- 600W Surface Mount Transient Voltage Suppressors SMBJ3V3A are Designed Specifically to Protect Sensitive Electronic Equipment
- Smiths Interconnect‘s Volta line of WLCSP Accelerating Device Brings up and Ramps up Production for WLCSP 5G Mobile ICs
- The CAT 6 UTP Modules Meet All The Performance Requirements of The CAT 6 Hardware Transmission Parameters
- Nextron‘s 1000BASE-T1 Automotive Ethernet Solution:4 way SPE circular connectors
- RoSPE-HMTD Fully Shielded 360° Differential Connector with Frequency Ranges up to 15GHz
- Differential Data Connectors for Frequencies up to 20 GHz and Data Transmission Rates up to 56 Gbps
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.