SPAU 8001199 Pressure sensor Operating instructions

2022-07-04
■Product description
●The operating instructions describe the entire function range. The function range is limited, depending on the product variant.
■Function and application
●The pressure sensor SPAU is intended for monitoring pressure in the piping. The sensor converts pneumatic pressure values (relative pressure) into electrical sig­nals, which can be used for control or regulating functions.Measurements are carried out using a piezo resistive sensor element with a following electronic evalu­ation unit. Interfacing to the higher-level system is provided by 1 or 2 switching outputs, an analogue output and/or an IO-Link interface.
●The switching outputs can be configured for monitoring of a threshold value, a pressure range or a differential pressure. For each output, PNP or NPN and nor­mally open (NO) or normally closed (NC) can optionally be set. Via the IO-Link inter­face, process values can be read out and parameters changed and transmitted to additional devices.

FESTO

SPAU8001199SPAU-...-TSPAU-...-HSPAU-...-ASPAU-...-WSPAU-...-FSPAU-...-L-...SPAU-...-LK-V-...SPAU-...-LK-B-...SPAU-...-LK-A-...

More

Part#

Pressure sensor

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2014/10

1410NH

169 KB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: