ET-M8196F Ethernet Remote Unit with High-speed, DSP-based, 6-axis Motion Control Module
■The ET-M8196F is a compact remote motion control device which uses Modbus TCP as its communication protocol. The ET-M8196F acts as a server in a Modbus TCP network and supports all standard Modbus function codes defi ned by the Modbus TCP protocol. Nowadays many PCs have got limited PCI slots; therefore the ET-M8196F can be used to replace PCI motion control cards. The ET-M8196F has got two Ethernet ports which allow daisy chaining.
■The motion controller of the ET-M8196F consists of an Ethernet communication module and a 6-axis motion control card. A digital signal processor (DSP) is the brain of the motion controller which calculates the commanded move trajectory and manages supervisory control by monitoring the limits and emergency stops to ensure safe operation. I/O control output (e.g. latch, compare, encoder counter etc.) is realized in a Field Programmable Gate Array (FPGA).
■The motion controller is suitable for general-purpose motion control applications. In additions to its wide speed range, this intelligent motion controller also has a variety of built-in motion control functions, such as 2- to 6-axis linear interpolation, 2- or 3-axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration, and automatic home search, etc.
■In addition the ET-M8196F acts as an FRnet master and can control up to 128 digital outputs and 128 digital inputs. FRnet is a two-wire serial bus and has a scan interval of 0.72 ms and it is specifically designed for easy and cost eff ective wiring. ICPDAS provides a large range of FRnet I/O terminal boards and modules.
■An application programming interface (API) for communicating with the ET-M8196F motion controller is being provided. This enables the user’s program on the host computer to easily interact with the motion controller. A software utility for Ethernet configuration and basic motion settings and execution is part of the software package.
●Features
■Remote control via Modbus TCP
■DSP-based motion control module
■Pulse output rate: 4 MHz (Max.)
■Maximum encoder input frequency: 12 MHz
■Independent 6-axis motion control
■2- to 6-axis linear/ 2- to 3-axis circular/ helical interpolation function
■Continuous interpolation
■4-step home mode with auto-searching
■Synchronized start motion
■Programmable T/S-curve acceleration and deceleration
■Software limit protection
■Software FIFO for arbitrary curve motion
■High-speed position latch
■High-speed compare trigger and auto-increment compare mode
■Expandable remote I/O: 128 DI and 128 DO via a two-wire FRnet interface.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021.12 |
|
|
|
|
|
|
|
|
128 KB |
- +1 Like
- Add to Favorites
Recommend
- TDK Announces Worldwide Availability of a New Generation of MEMS Barometric Pressure Sensor Platform
- TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sensor to Achieve NextNav Certification
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- Application of Sensors in Healthcare: Catheters
- PMICRO Launched PL51 Series Chips with ADC Function, Integrated Real EEPROM MCU and Built-in Single Cycle ET8051 Core
- 蓝牙SOC芯片是无线通信技术的核心力量
- [产品]日清纺300mA的稳压器R1526，输出电压范围为1.8~9.0V，具有过电流保护
- RARA Would Like to Give Customers a “One-stop Solution” with All Kinds of Resistive Products
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
