Model A and B Dialtemp™ Dial Thermometers INSTRUCTION SHEET
■Model A and B Dial Thermometers are supplied standard with a 1⁄2" NPT hex mounting nut.Carefully screw the thermometer into the fitting by hand until slightly tight. Complete tightening using a 7⁄8" wrench on the hex nut. When using a thermowell, tighten only FINGER TIGHT. CAUTION: NEVER TIGHTEN BY TWISTING THE HEAD!To obtain a positive seal, coat threads with pipe joint compound, or use Teflon®tape.
■When inserting Dialtemp™ Dial Thermometers into semi-solid materials, hold stem firmly and insert slowly and carefully to avoid bending. Do not hold thermometer by the head when inserting into a material, always hold by the stem.
■A1⁄4" NPT mounting nut, 3⁄4" NPT Adapter bushing and plain hex bushing (with no threads) are also available as mounting options for the Model A and B Dial Thermometers.
■It is not always desirable to permanently mount Dialtemp™ Thermometers. Clip Hangers (Model C-10) and Spring Handles (T-27) are available
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
0702 |
|
|
|
M0055 |
|
88 KB |
- +1 Like
- Add to Favorites
Recommend
- Taoglas Connects Bees and Data to Ensure Optimum Apiary Health with FW.86.B.SMA.M Model Antenna
- Why Can the Servo Motors Accurately Control the Rotation of the Model Aircraft?
- 20A Schottky Diode Model and Package
- How Are Stackable Header Pins Useful in Electronics and Engineering?
- Sunstar Engineering Americas Wins the Mazda Excellence Supplier Award
- Rogers Announces Acquisition of Silicone Engineering
- Wideband Gap Semiconductors: What Modeling Challenges Must We Overcome
- Mibbo Provides Reliable and Sustainable Power Solutions for Night Scene Engineering
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.