MODEL 976Ex ELIMINATOR BAR EC - TYPE EXAMINATION CERTIFICATE (Baseefa04ATEX0348X)
● The unit is available in active lengths of up to 4m and comprises a hollow section two part extruded ABS polycarbonate bar. A series of 100M Ohms resistive clements are encapsulated into the upper section of the bar. The lower section of the bar, together with two PVC end caps, completes the enclosure. One of the end caps has a threaded hole into which is ftted a plastic gland and associated plastic conduit,which provides mechanical protection for the two high voltage supply cables.
● The cables enter the polyurethane encapsulant and connect,in turn, to each of the resistive clements. At intervals, discharge pins protrude through the surface of the upper section of the bar, terminating in open-ended plastic shrouds. The discharge pins are staggered either side of a central raised portion, which runs the length of the upper section of the bar. Each discharge pin is coupled to one of the supply cables via a resistive element.
● Mounting of the bar is by means of recessed grooves which run along the sides of the lower section of the bar.
|
|
|
|
Test Report |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
14 December 2005 |
|
|
|
|
|
Baseefa04ATEX0348X |
|
|
676 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
