ISL54103 DDC Accelerator (DDCA)

2019-05-24
The ISL54103 DDC Accelerator (DDCA) is a dual active pull-up

bus terminator designed to improve data transmission speed

on the DDC 2-wire serial bus interfaces.

The DDCA detects rising input transitions with two internal

voltage references and two comparators per channel. After

the voltage on a data line crosses the first threshold

(VTRIPL), the boost pull-up current source is activated to

speed transition. After the voltage crosses the second

threshold (VTRIPH), the boost pull-up current source is

de-activated, leaving an active pull-up current of 275µA on

the line. When both channels are HIGH, the pull-up current

for both lines is reduced to 100µA to save power. Internal

logic ensures that the active and boost pull-up current

sources are not activated during downward transitions.

The level for VTRIPH is controlled by a bandgap voltage

referred to VDD. This feature makes the switching behavior

invariant for all power supply voltages between 2.7V and 5.5V.

A noise filter on each channel prevents the circuit from

responding to input transitions that do not exceed a

voltage-time threshold. To activate the boost circuit, the input

must exceed VTRIPL by 100Vns (typical) (See Figure 10).

The DDCA permits operation of the bus at frequencies up to

100kHz, despite the capacitive loads of multiple devices

and/or long PC board traces. Enhanced ESD protection on

the accelerator pins are guaranteed to withstand 8kV ESD

(HBM) events.

The DDC Accelerator provides an essential function in DDC

applications because of distributed capacitance of the DDC

wires in long video cables. By incorporating DDCA, systems

using DDC can reliably increase their bus load, allowing

longer cables, without the risk of data corruption.

Renesas

ISL54103ISL54103IHZ-T7ISL54103IHZ-T7A

More

Part#

DDC Accelerator (DDCA)

More

Video Multiplexers ]Video Cable Extenders ]Video Distribution Amplifiers ]Televisions ]Computer Monitors ]Projectors ]

More

Datasheet

More

ESD(HBM,>2kV) 、 ESD(HBM,>8kV) 、 IPC/JEDEC J STD-020 、 ISO9001 、 Pb-free 、 RoHS

More

Please see the document for details

More

More

5 Ld SOT-23

English Chinese Chinese and English Japanese

October 14, 2011

Rev 2.00

FN6303

570 KB

- The full preview is over. If you want to read the whole 8 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: