Model 2601B-PULSE System SourceMeter Instrument Specifications

2022-06-08
● This document contains specifications and supplemental information for the Model 2601B-PULSE System SourceMeter® 10 µs Pulser/SMU instrument. Specifications are the standards against which the Model 2601B-PULSE instrument is tested. Upon leaving the factory, the 2601B-PULSE meets these specifications. Supplemental and typical values are non-warranted, apply at 23 °C, and are provided solely as useful information.
● Source and measurement accuracies are specified at the terminals of the SourceMeter instrument under these conditions:
■ 18 °C to 28 °C, <70% relative humidity.
■ After two-hour warmup.
■ Speed normal (1 NPLC).
■ A/D autozero enabled.
■ Remote sense operation only or properly zeroed local operation.
■ Calibration period: One year.
● Pulser specification accuracies are specified at the terminals of the instrument under these conditions:
■ 10 µs aperture minimum.
■ Remote sense operation only.
■ Total cable and DUT inductance of ≤3 µH measured at 100 kHz.

TEKTRONIX

Model 2601B-PULSE2601B-PULSE

More

Part#

System SourceMeter InstrumentSystem SourceMeter®10μs Pulser/SMU instrument

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

February 2022

Rev. B

SPEC-2601B-PULSE

547 KB

- The full preview is over. If you want to read the whole 15 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: