Model 2601B-PULSE-CA1 Cable Kit Instructions
Two of these cables are jumpered to reduce loop inductance and are intended for making the FORCE HI and LO connections for a 4-wire measurement. The jumpered end is intended for connection to the device under test (DUT).
The other two cables are intended for making the SENSE HI and LO connections.
This cable kit is intended for use with the Model 2601B-PULSE System SourceMeter®instrument with the 2601B-P-INT Interlock and Cable Connector Box installed.
●Characteristics
■SENSE cables
▲Rated voltage and current: 40 V maximum, 11 A
▲Operating environment: −40 °C to +85 °C
▲Characteristic impedance: 50 Ω
▲DC resistance: 70 mΩ
▲Cable diameter: 2.85 mm (0.112 in.)
■FORCE cables
▲Rated voltage and current: 40 V maximum, 11 A
▲Operating environment: −40 °C to +85 °C
▲Characteristic impedance: 50 Ω
▲Loop DC resistance*: 150 mΩ
▲Loop inductance at 100 kHz*: 700 nH
▲Cable diameter: 2.85 mm (0.112 in.)
▲Jumper length: 152 mm (6.0 in.)
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
April 2020 |
|
|
|
|
|
077168800 |
|
|
175 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
