Chico A and Chico A-P sealing compound, Chico X fiber and Chico SpeedSeal For sealing fittings and hubs
● Chico A sealing compound:
▲ A water soluble powder that can be easily mixed and poured; the compound, unusually dense, expands slightly when hardening and bonds to inner walls of sealing fittings; compound hardens in 60-70 minutes
▲ Cure time is 8 hours for Class I, Groups C and D applications and 72 hours for Class I, Group A and B applications
▲ 1 year shelf life from date of manufacture
▲ Ambient temperature range (after curing) is -40°F to +165°F
● Chico A-P Intrapak®:
▲ Packaged in two compartment plastic pouch with precise amount of water for mixing; no mixing or measuring implements required
▲ A hard squeeze of the water compartment forces the water into the compartment containing the Chico compound; mixing is completed by kneading the pouch for one minute
▲ Mixed sealing compound is poured directly into the sealing fitting - no funnel required; the package label indicates the size and quantity of sealing fittings each pouch will properly fill; compound hardens in 60-70 minutes
● Chico X fiber:
▲ A mineral wool that packs easily, forming around each conductor
● Chico SpeedSeal compound:
▲ Installs a reliable seal in five minutes - every time
▲ Hardens to a dense, strong mass that is suitable for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications
▲ UL and cUL Listed for use with yh" to 2" Eaton's Crouse-Hinds series sealing fittings only
▲ Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the need for measuring before mixing
▲ Packaged with a screw-on nozzle for accurate dispensing
▲ Expands in the sealing fitting, eliminating the need to separate the individual conductors with Chico X fiber
▲ Chico X fiber dams are not required in horizontal applications, reducing installation times
▲ Completely hardens in 20 minutes, simplifying use for OEMs
▲ Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings; all ice crystals must be removed from inside the conduit seal before dispensing Chico SpeedSeal compound; the compound should be kept above 10°C (50°F) and below 85°F (29°C) prior to mixing; the sealing fitting must be kept at or above 4°C (40°F) during the 4 to 10 minute expansion/gel time of the compound
▲ 18 month shelf life
Chico X4 、 Chico X6 、 Chico X7 、 Chico A3 、 Chico A4 、 Chico A05 、 Chico A200 、 Chico A19 PX 、 Chico A39 PX 、 CHICO SS2 、 CHICO SS6 、 EYS1 、 EYS16 、 EYS11 、 EYS116 、 EYD1 、 EYD16 、 EYD11 、 EYD116 、 EYS2 、 EYS26 、 EYS21 、 EYS216 、 EYD2 、 EYD26 、 EYD21 、 EYD216 、 EYSX11 、 EYDX11 、 EYS3 、 EYS36 、 EYS31 、 EYS316 、 EYD3 、 EYD36 、 EYD31 、 EYD316 、 EYSX21 、 EYDX21 、 EYS41 、 EYS416 、 EYS4 、 EYS46 、 EYD4 、 EYD46 、 EYD41 、 EYD416 、 EYSX31 、 EYDX31 、 EYSX41 、 EYDX41 、 EYD5 、 EYD56 、 EYD51 、 EYD516 、 EYS51 、 EYS516 、 EYS61 、 EYS616 、 EYS6 、 EYS66 、 EYD6 、 EYD66 、 EYD61 、 EYD616 、 EYSX51 、 EYDX51 、 Chico A 、 Chico A-P 、 Chico X |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/2/22 |
|
|
|
|
|
444 KB |
- +1 Like
- Add to Favorites
Recommend
- Eaton authorizes Sekorm to distribute inductors, fuses, TVS tubes, super capacitors, power modules and other products
- Eaton Advances More Resilient, Sustainable Electricity in New York City with Energy Storage Projects Valued at More than $7 Million
- Eaton Acquires 49% stake in Jiangsu Ryan Electrical Co. Ltd. to Accelerates Eaton’s Growth in the Renewable Energy, Data Center, Utility and Industrial Markets
- Eaton Introduces Higher Power Fuses for Electrified Commercial Vehicles
- Eaton Deepens Partnership with Palantir to Enhance AI Use in Operations
- Eaton‘s Innovative Safety Solutions Help Accelerate Electrified Vehicle Transition
- GSA Expands Contract with Eaton to Include Electric Vehicle Supply Equipment, Help Accelerate Low-carbon Federal Infrastructure Projects
- Eaton and Sunverge Expand Strategic Collaboration to Help Utilities Manage Residential EV Charging Infrastructure
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.