Cat.6 Unshielded Copper Structured Cabling System Hardware
2022-05-24
■RJ45 Cat.6 UTP Jacks
●Our Cat.6 copper interconnect products work together to provide an easy-to-use solution for deploying high-speed connections throughout a building. The RJ45 jack is a key component in this system. These RJ45 jacks have been certified by an independent test laboratory to hardware certification. Each jack component is able to terminate to any certified Cat.6 cable and patch cord combination to achieve full channel performance.
●The jack’s unique three-cable-entry points help make installation simple. The traditional one-click design enables an easy, tool-less termination on unshielded twisted pair cables, meeting industry performance standards.
■Cat.6 UTP Copper Patch Cords
●Hardware-compliant copper patch cords enable you to complete your network to Cat.6 according to ANSI/TIA 568-C.2 and Class E ISO 11801/EN 50173-1. They are constructed with UUTP stranded cable, LSZH™ rated and have PVC jackets and protected latches to ensure durability. These patch cords are available in a variety of lengths and colours for easy cable management and administration.
■Patch Panels
●Copper patch panels are modular and provide an aesthetically pleasing solution for housing modular jacks. These lightweight, aluminium panels are compatible with RJ45 jacks as well as typical industry-accepted modular jacks.
●The classic version includes a cable-strain-relief tray and earth-connection point. The Eco panels are a simple version, without an earth-connection point, to use with racks with integral cable management. The panels include screws, cage nuts, and cable ties. Port blanking and coloured identification caps are available. The range includes a patch cord management panel with five management rings.
■Faceplates and Outlets
●Faceplates are compatible with most electrical wall boxes and are available in 2-port and 4-port versions. These faceplates fit common European dimensions and are compatible with RJ45 modular jacks. Port icons for port identification as well as label windows are included in some products.
■Copper Cable
●Four-pair copper cable is high performing, compliant with IEC 61156-5:2013 (ed. 2.1), and EN 50288-10-1: 2012. The Cat.6 UTP cable is made up of four pairs of colour-coded solid-copper wires, surrounded by an outer flame-retardant jacket. The cable meets industry standards for low-voltage networks to transfer voice, data, and video signals. Applications include IEEE 802.3 standards for 10 Mb to 1 Gb networks. It is also applicable to IEEE 802.3af POE and 802.3at POE+ and ATM LAN 1.2 Gb systems.
●Our Cat.6 copper interconnect products work together to provide an easy-to-use solution for deploying high-speed connections throughout a building. The RJ45 jack is a key component in this system. These RJ45 jacks have been certified by an independent test laboratory to hardware certification. Each jack component is able to terminate to any certified Cat.6 cable and patch cord combination to achieve full channel performance.
●The jack’s unique three-cable-entry points help make installation simple. The traditional one-click design enables an easy, tool-less termination on unshielded twisted pair cables, meeting industry performance standards.
■Cat.6 UTP Copper Patch Cords
●Hardware-compliant copper patch cords enable you to complete your network to Cat.6 according to ANSI/TIA 568-C.2 and Class E ISO 11801/EN 50173-1. They are constructed with UUTP stranded cable, LSZH™ rated and have PVC jackets and protected latches to ensure durability. These patch cords are available in a variety of lengths and colours for easy cable management and administration.
■Patch Panels
●Copper patch panels are modular and provide an aesthetically pleasing solution for housing modular jacks. These lightweight, aluminium panels are compatible with RJ45 jacks as well as typical industry-accepted modular jacks.
●The classic version includes a cable-strain-relief tray and earth-connection point. The Eco panels are a simple version, without an earth-connection point, to use with racks with integral cable management. The panels include screws, cage nuts, and cable ties. Port blanking and coloured identification caps are available. The range includes a patch cord management panel with five management rings.
■Faceplates and Outlets
●Faceplates are compatible with most electrical wall boxes and are available in 2-port and 4-port versions. These faceplates fit common European dimensions and are compatible with RJ45 modular jacks. Port icons for port identification as well as label windows are included in some products.
■Copper Cable
●Four-pair copper cable is high performing, compliant with IEC 61156-5:2013 (ed. 2.1), and EN 50288-10-1: 2012. The Cat.6 UTP cable is made up of four pairs of colour-coded solid-copper wires, surrounded by an outer flame-retardant jacket. The cable meets industry standards for low-voltage networks to transfer voice, data, and video signals. Applications include IEEE 802.3 standards for 10 Mb to 1 Gb networks. It is also applicable to IEEE 802.3af POE and 802.3at POE+ and ATM LAN 1.2 Gb systems.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
