ISL8271M Digital DC/DC PMBus 33A Module
with an integrated digital PWM controller, synchronous power
switches, an inductor, and passives. Only bulk input and output
capacitors are needed to finish the design. The 33A of
continuous output current can be delivered without the need
for airflow or a heatsink. The thermally enhanced HDA module
is capable of dissipating heat directly into the PCB.
The ISL8271M uses ChargeMode™ control architecture, which
responds to a transient load within a single switching cycle.
The ISL8271M comes with a preprogrammed configuration for
operating in a pin-strap mode: the output voltage, switching
frequency, and the device SMBus address can be programmed
with external resistors. Other configuration options, such as
soft-start and fault limits can be programmed or changed
using the PMBus compliant serial bus interface. PMBus can be
used to monitor voltages, current, temperatures, and fault
status. The ISL8271M is supported by PowerNavigator™
software, a Graphical User Interface (GUI) that can be used to
configure modules to a desired solution.
The ISL8271M is available in a 40 Ld compact 17mmx19mm
HDA module with very low profile height of 3.55mm, suitable
for automated assembly by standard surface mount
equipment. The ISL8271M is RoHS compliant by exemption.
ISL8271M 、 ISL8271MAIRZ 、 ISL8271MBIRZ 、 ISL8271MEVAL1Z 、 GRM32ER61C476ME15L 、 GRM32ER61E226KE15L 、 EMK325BJ476MM-T 、 TMK325BJ226MM-T 、 GRM32ER60J107M 、 C3225X5R0J107M 、 12106D107MAT2A 、 16TQC150MYF 、 4TPE470MCL 、 6TPF470MAH 、 ISLxxxxMFTRZS |
|
[ Server, telecom, storage, and datacom ][ Industrial/ATE and networking equipment ][ General purpose power for ASIC, FPGA, DSP, and memory ] |
|
Datasheet |
|
ESD 、 IPC/JEDEC J STD-020 、 ISO9001 、 Pb-free 、 RoHS |
|
Please see the document for details |
|
Industrial |
|
|
|
40 Ld 17x19 HDA |
|
English Chinese Chinese and English Japanese |
|
Aug 17, 2017 |
|
Rev.4.00 |
|
FN8636 |
|
3.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.