ACS712 Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.1 kV-RMS Isolation and a Low-Resistance Current Conductor
●The Allegro™ ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.
●The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.
●The output of the device has a positive slope (>V-IOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sampling. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the ACS712 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.
●The ACS712 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
|
ACS712 、 ACS712ELCTR-05B-T 、 ACS712ELCTR-20A-T 、 ACS712ELCTR-30A-T |
|
|
Fully Integrated Hall-Effect-Based Linear Current Sensor IC 、 Current Sensor IC |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOIC |
|
|
English Chinese Chinese and English Japanese |
|
|
February 7, 2022 |
|
|
Rev. 20 |
|
|
MCO-0000197 |
|
|
1008 KB |
- +1 Like
- Add to Favorites
Recommend
- Crocus Technology Acquired by Allegro MicroSystems to Accelerate Innovation in TMR Sensing Technology
- Melexis Unveils Automotive 200-2000A Current Sensors with Integrated Overcurrent Detection
- Crocus Current Sensors Offers Solar Inverters High Accuracy, High Bandwidth and Low Noise
- Melexis Launches the MLX91230 Current Sensors Which Brings 0.5% Accuracy in a Compact Design
- Melexis Introduces Next Generation of Isolated Integrated Current Sensors for Automotive Applications
- In 2022, Melexis’ Outperforming Product Lines Were Current Sensors, Embedded Drivers, Magnetic Position Sensors, and Temperature Sensors
- ZETTLER Magnetics ACST Current Sensors Used in Charging of Electric Vehicles
- Melexis Reveals High-accuracy Current Sensors Optimized for Affordable E-mobility
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
