ispPAC-POWR1014/A
●Description:
■Lattice’s Power Manager II ispPAC-POWR1014/A is a general-purpose power-supply monitor and sequence controller, incorporating both in-system programmable logic and in-system programmable analog functions implemented in non-volatile E²CMOS® technology. The ispPAC-POWR1014/A device provides 10 independent analog input channels to monitor up to 10 power supply test points. Each of these input channels has two independently programmable comparators to support both high/low and in-bounds/out-of-bounds (window-compare) monitor functions. Four general-purpose digital inputs are also provided for miscellaneous control functions.
■The ispPAC-POWR1014/A provides 14 open-drain digital outputs that can be used for controlling DC-DC converters, low-drop-out regulators (LDOs) and optocouplers, as well as for supervisory and general-purpose logic interface functions. Two of these outputs (HVOUT1-HVOUT2) may be configured as high-voltage MOSFET drivers. In high-voltage mode these outputs can provide up to 12V for driving the gates of n-channel MOSFETs so that they can be used as high-side power switches controlling the supplies with a programmable ramp rate for both ramp up and ramp down.
■The ispPAC-POWR1014/A incorporates a 24-macrocell CPLD that can be used to implement complex state machine sequencing for the control of multiple power supplies as well as combinatorial logic functions. The status of all of the comparators on the analog input channels as well as the general purpose digital inputs are used as inputs by the CPLD array, and all digital outputs may be controlled by the CPLD. Four independently programmable timers can create delays and time-outs ranging from 32μs to 2 seconds. The CPLD is programmed using Logi- Builder™ an easy-to-learn language integrated into the PAC-Designer® software. Control sequences are written to monitor the status of any of the analog input channel comparators or the digital inputs.
■The on-chip 10-bit A/D converter is used to monitor the V-MON voltage through the I²C bus or JTAG interface of the ispPAC-POWR1014A device.
■The I²C bus/SMBus interface allows an external microcontroller to measure the voltages connected to the V-MON inputs, read back the status of each of the V-MON comparator and PLD outputs, control logic signals IN2 to IN4 and control the output pins (ispPAC-POWR1014A only). The JTAG interface can be used to read out all I²C registers during manufacturing.
|
ispPAC-POWR1014/A 、 ispPAC-POWR1014A-01T48I 、 ispPAC-POWR1014-01T48I 、 ispPAC-POWR1014A-02T48I 、 ispPAC-POWR1014-02T48I 、 ispPAC-POWR1014A-01TN48I 、 ispPAC-POWR1014-01TN48I 、 ispPAC-POWR1014A-02TN48I 、 ispPAC-POWR101 |
|
|
In-System Programmable Power Supply Supervisor 、 Reset Generator 、 Sequencing Controller 、 general-purpose power-supply monitor |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
February 2012 |
|
|
Version 01.9 |
|
|
DS1014_01.9 |
|
|
4.8 MB |
- +1 Like
- Add to Favorites
Recommend
- Why GaN in Space?
- Innoscience Built The First World-class 8-inch Wafer FAB with Gold-free and CMOS Compatible Process
- Two kinds of structure of unit in SiC power MOSFET: plane structure and groove structure
- Successful Demonstration of Next-Gen Ka-band Rx Beamforming IC Portfolio with 1.5dB NF LNA
- Futureway Has Developed a Variety of Silicone Solutions for Battery Pack
- UnitedSiC Rediscovers The Perfect Switch with SiC FETs
- These Kinds of MOS Tubes “Breakdown“, How Many Do You Know?
- Low-Frequency Noise Modeling When Quantum Chips Are Getting Noiser
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
