RP225 Advanced distribution grid monitoring system: GridAdvisor Insight RP series optical line post medium-voltage and current sensor system
◆4 kV to 35 kV outdoor rated, 200 kV BIL, 60 Hz
◆Includes both current and voltage sensing
◆Sensing voltage: 4 kV to 35 kV
◆Sensing amperes: 5 A to 30 kA
◆Transients: 10 dB (10x steady-state condition)
◆Harmonics: measurements to 50th voltage harmonic
◆Approximate weight: 37 lb (5.4 kg
●Features and benefits
■The GridAdvisor Insight optical medium-voltage and current sensor is a direct replacement for standard power transformers and current transformers. Because of the “all optical” sensor design, there are no conductive materials used for the measurement of both voltage and current. The insulator body is casted in hydrophobic cycloaliphatic epoxy (HCEP) using a state-of-the-art injection molding process.
■HCEP construction provides superior arc track, ozone and ultraviolet-resistive properties while maintaining physical strength. The hydrophobic surface properties of HCEP ensure highly reliable performance in wet or humid conditions. All calibration and performance settings are stored in the ruggedized modular electronics enclosure at the base of the optical cable. The m410 modular optical sensor processor provides a “highly accurate” and “low cost” precision solution for distribution grid monitoring and control.
●GridAdvisor optical features
■All-optical solution for voltage and current measurements:
◆Two SKUs for 15/25 kV or 35 kV voltage classes
◆Modular, hot-swappable and plug & play
◆Calibration and offsets are contained within the RP225 sensor
◆Non-conductive fiber optic cable connection to sensor and sensor processor
●HCEP benefits
◆Enhanced water shedding properties
◆Reduced contamination-related leakage
◆Improved product quality and reliability
◆Improved UV protection
◆Results in a more consistent and reliable product
|
RP series 、 RP 、 RP225 、 RG125 、 RP225-PS875-00005 、 RP235-PS875-00006 |
|
|
|
|
|
Supplier and Product Introduction |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
December 2019 |
|
|
|
|
|
PA910005EN |
|
|
298 KB |
- +1 Like
- Add to Favorites
Recommend
- Eaton authorizes Sekorm to distribute inductors, fuses, TVS tubes, super capacitors, power modules and other products
- Eaton Advances More Resilient, Sustainable Electricity in New York City with Energy Storage Projects Valued at More than $7 Million
- Viking newly produced a High Power Thin Film Chip Resistors ARP series with Power rating of 1 W and Resistance range of 10 ~ 100KΩ
- Eaton EMobility Introduces High-voltage Bussmann EVK Series Fuses, Optimized for High-powered Electrified Vehicles
- Eaton Introduces Higher Power Fuses for Electrified Commercial Vehicles
- Eaton Acquires 49% stake in Jiangsu Ryan Electrical Co. Ltd. to Accelerates Eaton’s Growth in the Renewable Energy, Data Center, Utility and Industrial Markets
- Eaton‘s Innovative Safety Solutions Help Accelerate Electrified Vehicle Transition
- Eaton Deepens Partnership with Palantir to Enhance AI Use in Operations
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
