SC18IS600 SPI to I²C-bus interface Product data sheet
■The SC18IS600 is designed to serve as an interface between the standard SPI of a host (microcontroller, microprocessor, chip set, etc.) and the serial I²C-bus. This allows the host to communicate directly with other I²C-bus devices. The SC18IS600 can operate as an I²C-bus master-transmitter or master-receiver. The SC18IS600 controls all the I²C-bus specific sequences, protocol, arbitration and timing.
●Features and benefits
■SPI slave interface
■SPI Mode 3
■Single master I²C-bus controller
■Four General Purpose Input/Output (GPIO) pins
■Two quasi-bidirectional I/O pins
■5 V tolerant I/O pins
■High-speed SPI: Up to 1.2 Mbit/s High-speed I2C-bus: 400 kbit/s
■96-byte transmit buffer
■96-byte receive buffer
■2.4 V to 3.6 V operation
■Power-down mode with WAKEUP pin
■Internal oscillator
■Active LOW interrupt output
■Available in TSSOP16 package
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TSSOP16;SOT403-1 |
|
|
English Chinese Chinese and English Japanese |
|
|
9 October 2019 |
|
|
Rev. 8 |
|
|
SC18IS600 v.8;SC18IS600 |
|
|
527 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
