NXP SC16IS7xx, SC18IS604, SC18IS606 AND SC18IM704 BRIDGES
■NXP has a range of UART, I²C and SPI bridges that allow conversion between protocols.
●Generally, the host and peripheral protocols are matched. The bridges are useful in situations such as a conference camera example, where the 24-bit I²C DAC is no longer available but the embedded processor cannot be changed.
●This is due to extensive firmware library or even in new designs where the legacy processor cannot be changed but the desired peripheral is only available with non-preferred protocol.
●NXP has four different categories of bridges with the I²C or SPI to UART bridge having five different devices within that function with different SPI speeds, number of downstream UART channels or number of general purpose pins. The part numbers written in red are released but will be phased out in the 2024/25 timeframe. They are being replaced with the part numbers in green which are functional replacements in the same TSSOP16 package but with different pinouts.
SC16IS7xx 、 SC18IS604 、 SC18IS606 、 SC18IM704 、 SC18IS600IPW/S8 、 SC18IS602BIPW/S8 、 SC18IM700IPW/S8 、 SC18IS604PW 、 SC18IS606PW 、 SC18IM704PW 、 SC16IS741AIPW 、 SC16IS740IPW/Q900 、 SC16IS750IPW 、 SC16IS750IBS 、 SC16IS760IPW 、 SC16IS760IBS 、 SC16IS752IPW 、 SC16IS752IBS 、 SC16IS762IBC 、 SC16IS762IPW 、 SC16IS741 、 SC161S750 、 SC16IS760 、 SC16IS752 、 SC16IS762 |
|
|
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
TSSOP16;TSSOP24;TSSOP28;HVQFN32 |
|
English Chinese Chinese and English Japanese |
|
2021/10/21 |
|
REV 1 |
|
NEXTGENBRIDGFSA4 |
|
666 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.