SB5000 Series Personnel Protection Industrial Shock Block
■Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI), Class C and Class D
▲Industrial Shock Block (ISB) is a personnel protection device designed to meet the requirements for special-purpose GFCIs defined by UL 943C. This standard outlines GFCI classes specifically designed for use in industrial facilities. Class C GFCIs are intended to be used on three-phase systems where the line-to-line voltage is 480 V or less with a trip level of 20 mA, while Class D GFCIs are intended to be used on 600 V systems. The Industrial Shock Block includes DFT harmonic filtering, an automatic self-test feature and is compliant to the UL 1998 Software in Programmable Components standard.
■Ground-Fault Circuit Interrupter (GFCI), Class A
▲The Shock Block is available as a 208 V Class A GFCI, allowing commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) for their three-phase loads up to 60 A.
■Equipment Ground-Fault Protective Device (EGFPD)
▲Industrial Shock Block is also available with adjustable protection settings as an EGFPD. The EGFPD models can be set to trip at 6 mA or from 10–100 mA in increments of 10 mA. This offers more flexibility since GFCI devices are not allowed to have an adjustable trip level.
■Ratings and Models
▲Industrial Shock Block (GFCI & EGFPD) is available for three-phase voltages from 208 to 600 V with a maximum full load current of either 32 or 60 A. The power system can be either solidly or high-resistance grounded and the load must be three phase without a neutral.
▲The standard enclosure is IP 69K/NEMA 4X and outdoor rated, suitable for all industrial environments including high-temperature washdown used in food production. A Class II, Division 2 option is also available for applications where explosive dust may be present (future option).
■Ground Wire (Load-Ground) Monitor
▲The Industrial Shock Block also monitors the ground wire (load-ground) connection between the Industrial Shock Blockand load. This is a required feature for Class C and D GFCI devices and is recommended for Class A GFCI and EGFPD devices. If the ground-return path is broken, the Industrial Shock Block will trip and provide an alarm by changing the state of the alarm contacts. This monitoring circuit includes an extra wire (pilot wire) between the Industrial Shock Block and load. At the load, the pilot wire is connected to a termination device. The other end of the termination device is connected to the load ground (typically the enclosure).
SB5000 Series 、 SB5000 、 SB5032-00x-0 、 SB5032-20x-0 、 SB5032-30x-0 、 SB5032-01x-0 、 SB5032-21x-0 、 SB5032-31x-0 、 SB5032-02x-0 、 SB5060-00x-0 、 SB5060-20x-0 、 SB5060-30x-0 、 SB5060-01x-0 、 SB5060-21x-0 、 SB5060-31x-0 、 SB5060-02x-0 |
|
Industrial Shock Block 、 Special-Purpose Ground-Fault Circuit Interrupter (SPGFCI) 、 Ground-Fault Circuit Interrupter (GFCI) 、 Equipment Ground-Fault Protective Device (EGFPD) 、 Ground Wire (Load-Ground) Monitor |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
020922 |
|
Rev: 020922 |
|
|
|
465 KB |
- +1 Like
- Add to Favorites
Recommend
- Littelfuse Expands SB5000 Industrial Shock Block® Ground-Fault Circuit Interrupter Series that Offer Protection for Three-phase Loads up to 100A
- SB5000 Industrial Shock Block Ground-Fault Circuit Interrupter with Circuit for Loads up to 60A, Protecting Personnel from Electrical Shock and Reducing Nuisance Tripping
- Very Fast Acting Fuse PICO® II Fuse Series, Designed for Battery Management System | Littelfuse
- New Littelfuse 400PV Photovoltaic Fuses Provide Rugged Circuit Protection for Next-Gen Integrated Solar Shingles
- Littelfuse EV1K Series Fuse First to Provide 1000Vdc Automotive Grade Protection for Next-Gen Passenger Cars and Commercial EVs
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse New High-Voltage Cartridge Fuses 828 Series, AEC-200 Compliant with a 1,000 Vdc Interrupting Rating
- Littelfuse Completes Acquisition of C&K Switches
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.