AVR-CAN development board Users Manual
■AVR-CAN is inexpensive way to learn AT90CAN128 microcontroller from Atmel.It's in very compact form 60x55mm and the presence of both CAN and RS232 allows the customer to make a bridge between UART and CAN networks. All AVR pins are available on extension connectors and the board can be easily a snap-on prototype or other mother board where additional circuits are built.
●BOARD FEATURES:
■MCU: AT90CAN128 – 128Kb Flash, 4Kb EEPROM, 4Kb SRAM, 52 GPIO, 32working registers, a CAN controller, Real Time Clock, four Timer/Counterswith PWM, 2 UARTs, Two-wire Serial Interface, an 8-channel 10-bit ADC,Watchdog Timer, SPI serial port, JTAG interface, five selectable power savingmodes
■5x2 pin JTAG connector for programming and debugging with AVR-JTAG-L orAVR-JTAG-USB
■RS232 DB9 female connector and driver
■CAN controller and interface
■User button
■Status LED
■16 MHz oscillator circuit
■32768 Hz oscillator circuit
■Reset button and circuit
■On board voltage regulator (+5V)
■Power supply LED
■Power supply connector
■Extension pin headers for every uC pin
■FR-4, 1.5 mm (0.062''), soldermask, white silkscreen component print
■Dimension 60x50 mm (2.36x1.96'')
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
February 2011 |
|
|
Rev.A |
|
|
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
