Linux for Olimex Allwinner and STM32 boards OLIMAGE GUIDE
Olimage is made to run on Olimex-made boards with Allwinner or STM32MP1 main chip. It supports almost all Olimex boards with the following processors – A10, A13, A20, A64, STM32P1.
The Olimage Linux image is made to be used used with OLIMEX-made boards with Allwinner A10,A13, A20, A64, and STM32P151 series processors and all their variants (albeit some hardware features might not be supported).The only exceptions at the moment of writing this document are the A33-OLinuXino board and the A13-OLinuXino-MICRO board – they are not supported by Olimage.
The Linux image support some of the extension hardware that Olimex manufactures (like LCD displays, USB extensions, UEXT extensions).
Olimage is a free open-source software effort, using it or testing it requires no purchase.
Olimage is the recommended image for almost all Olimex-made boards with Allwinner-madeor STM-made main chip. The exceptions are the A13-OLinuXino-MICRO board and the A33-OLinuXino board which are currently not supported by Olimage.
This guide is intended for absolute beginners. It does not attempt to be complete nor it aims to cover all possible hardware and software scenarios. More experienced users would find this document redundant.
This guide starts with quickstart instructions and more detailed explanation follows.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
15.07.21 |
|
revision B |
|
|
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.