GN 20 Levelling feet with mounting holes Operating instruction
■The levelling foot must be installed with a wrench in order to be positioned correctly. The minimum screw-in depth l-2 must be observed. The adjustable range is l-3 (see image). The maximum screw-in depth is the result of the sum of l-2 and l-3. Particular care must be taken to ensure that the flat seal is positioned correctly on the recess.
■The machine can now be lowered and the levelling foot can be installed on the ground. It must be ensured that the applied seals and screws correspond to the hygiene standard. The screws with the intended torque (depending on the fastening method and manufacturer’s information) must be tightened to at least 30 Nm. This ensures a defined fit between the seal and the ground surface.
■The machine can now be levelled (A/F1).
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
06/2019 |
|
|
|
|
|
BT-20B-V1-06.19 |
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
