GN 20 Leveling Feet
●Information:
■GN 20 leveling feet with mounting holes are certified according to 3-A Sanitary Standards, Inc. and EHEDG guidelines and are intended for use in hygienic areas.
■The bottom seal protects the area beneath the base from dirt. For this, the foot must be screwed down using the mounting holes and compressed accordingly. Hygienic fasteners such as GN 1580 screws and nuts, and the correct position of the mounting bores in the mating surface are essential for a properly sealed foot to surface installation. The sealing ring above the adjustment sleeve enables mounting without dead space. Due to the wiper or the ball sealing, the movable components are sealed against the environment.
■The high surface quality prevents dirt from adhering and facilitates cleaning.
■The values for static load capacity listed in the table refer to a purely vertical load to the leveling foot. Under normal operating conditions, bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/09/30 |
|
|
|
|
|
|
|
|
724 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
