NGC-30 Advanced Heat-Tracing Control System
2022-02-23
●PRODUCT OVERVIEW
■The nVent RAYCHEM NGC-30 is a multi-circuit electronic control, monitoring and power distribution system for heat-tracing used in process-temperature maintenance and freeze-protection applications. The NGC-30 system can control up to 260 circuits and monitor up to 1040 temperature inputs with multiple networked panels. The nVent RAYCHEM NGC-30 Controller can accommodate temperature inputs from a variety of sources: hard-wired, from Remote Monitoring Modules (RMM2) or from Power Line Carrier Interface (PLI) transmitters (SES/SPC/700-TT). Each panel can typically control up to 40 individual heat-tracing circuits and is available with power distribution as an option. The nVent RAYCHEM NGC-30 is available with two output types: an electromechanical relay (EMR) or a solid-state relay (SSR). Both types allow circuit switching up to 60 A at 600Vac with single or three-phase power. Up to four Resistance Temperature Detector (RTD) inputs for each heat-tracing circuit allow for a variety of combinations of temperature control, monitoring, and alarming. Systems can be configured for nonhazardous and hazardous locations. The ability to monitor and configure the controller is available both locally and remotely with the User Interface Unit (UIT3) and the nVent RAYCHEM Supervisor software.
■The nVent RAYCHEM NGC-30 is a multi-circuit electronic control, monitoring and power distribution system for heat-tracing used in process-temperature maintenance and freeze-protection applications. The NGC-30 system can control up to 260 circuits and monitor up to 1040 temperature inputs with multiple networked panels. The nVent RAYCHEM NGC-30 Controller can accommodate temperature inputs from a variety of sources: hard-wired, from Remote Monitoring Modules (RMM2) or from Power Line Carrier Interface (PLI) transmitters (SES/SPC/700-TT). Each panel can typically control up to 40 individual heat-tracing circuits and is available with power distribution as an option. The nVent RAYCHEM NGC-30 is available with two output types: an electromechanical relay (EMR) or a solid-state relay (SSR). Both types allow circuit switching up to 60 A at 600Vac with single or three-phase power. Up to four Resistance Temperature Detector (RTD) inputs for each heat-tracing circuit allow for a variety of combinations of temperature control, monitoring, and alarming. Systems can be configured for nonhazardous and hazardous locations. The ability to monitor and configure the controller is available both locally and remotely with the User Interface Unit (UIT3) and the nVent RAYCHEM Supervisor software.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
