702030 JUMO Quantrol LC100/LC200/LC300 Universal PID Controller Series Data Sheet
■The Quantrol series is available in the three DIN formats 48 mm x 48 mm, 48 mm x 96 mm, and96 mm x 96 mm. It is used for two-state and three-state control applications as well as for the control of regulating valves or SCR power controllers via a continuous controller output.
■The universal analog input for RTD temperature probes, thermocouples, or current/voltage signals is user programmable. The setpoint value, the actual value, and all parameters are displayed on two seven-segment LED displays (red/green) with one or two decimal place(s). The values can be displayed in °C or °F. Depending on the format, up to five relay outputs with as witching capacity of 3 A / 230 V or up to four logic outputs 0/14 V are available. The switch position of the relays or logic outputs is displayed using yellow LEDs. Different functions can be assigned to these outputs. An analog output 0 to 10 V or 0(4) to 20 mA is configurable as continuous controller output, actual value output, or setpoint value output. Using the binary input,the device settings and operation can be locked, a ramp or the timer can be activated, or self-optimization can be initiated. The supply voltage is optionally AC 110 to 240 V or AC/DC 20 to 30 V.
■The controller has a ramp function with adjustable gradient for constant setpoint change. In addition, a special firing curve for small pottery kilns can be used which allows controlled starting and time dependent firing. The user can enter setpoint values, gradient, and firing time directly at the device.
■The device can be connected to host systems or devices using the RS485 serial interface. Instead of operating the device from the front, the user can also program the controller using the setup program and USB interface; this requires no additional voltage supply for the controller.The Quantrol series, like all JUMO controllers, is also equipped with reliable JUMO self-optimization (autotuning).
●Special features
■48 × 48, 48 × 96, 96 × 96 mm formats
■Two-state/three-state and continuous controller
■Sensor monitoring
■Up to 5 outputs
■Self-optimization (autotuning) for exact PID control
■Manual/automatic mode
■Configurable limit value monitoring (alarms)
■Setpoint changeover
■Level inhibit and key lock
■RS485 interface (Modbus RTU)
■Ramp and timer function
■Firing curve for pottery kilns
■Push-in controller insert
■Setup interface (USB Mini-B)
|
702030 、 LC100 、 LC200 、 LC300 、 702034/8-3412-23 、 00506252 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2013-09-23 |
|
|
|
|
|
00600565 |
|
|
719 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
