JUMO mTRON T Measuring, Control, and Automation System
This setup program is a PC software program for configuring and operating the described measuring, control, and automation system.The PC hardware and software requirements for installing and operating the setup program are described in the "Installation" section of this manual.The measuring, control, and automation system is intended for use in an industrial environment, as specified in the technical data for the individual modules in the system. Other uses or uses beyond those defined are not viewed as intended uses.The modules are built according to the relevant standards and directives as well as the applicable safety regulations. Nevertheless, incorrect use may lead to bodily injury or property dam-age.
■To avoid danger, the modules may only be used:
▲For the intended use
▲When in good order and condition
▲When taking into account the technical documentation provided
■Even if a module is used correctly and according to the intended use, it may still cause application-related dangers (e.g. due to missing safety devices or incorrect settings).This manual contains the relevant safety information and warnings for prevention of incorrect settings. These must be adhered to.
|
|
|
|
|
|
|
Development Environment（Software/Firmware） |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/03/29 |
|
|
V4.00 |
|
|
00575647 |
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
