HPC-1 remote control receiver User Manual

2022-01-15
■The GAMA Electronics, Inc. HPC-1 remote control receiver operates from a single 20-28 VDC power supply. Three non-isolated outputs are controlled by relays which, when energized, route the input power supply voltage directly to the corresponding output(s). Note: To operate the system the ON/OFF button must be held for 3 seconds. This will activate the system. After 5 minutes of inactivity the control will deactivate.
■Specifications
●Power Supply: 20-28VDC 10A - Reverse polarity protected. Not fused
●Output relays: 8A MAX switching current (total not to exceed MAX power input rating)
●Power consumption: <50mA
●Input power connection: 18 AWG 300V stranded MTW or
●equivalent. Output connection: 18 AWG 300V stranded MTW or
●equivalent. Momentary or Latching operation: Momentary only
●Shipping Weight: 1 lb
●Dimensions: 4.76 in (W) 5.00 (D) 1.17 (H)
●Mounting instructions: 4 mounting holes .18 in diameter. Up to #8
●screw Environmental:
●Operating temp: 0° F-160° F
●Not IP rated
●Accessories: KF340-3 transmitter, LRA-340 external antenna
●Applications: Optimized for remote control of hydraulic systems using 24VDC power supply

GAMA

HPC-1HPC-1-24V

More

Part#

remote control receiver

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2020/3/11

595 KB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: