CMP 200®/ CMP 200® DR X-ray Generator Service Manual
■This chapter summarizes the main features of the CMP 200® and CMP 200® DR X-ray generators (performance, regulatory and compatibility). Safety information is provided, along with environmental, room, and installation requirements. This chapter concludes with a pre-installation checklist and a diagram showing the major component layout.The information in this chapter is provided in order for the installer to be able to plan the site layout prior to installation of the generator.
●Generator Description
■The CMP 200® 100 kHz high frequency X-ray generator is a component for use in film-based stationary radiographic X-ray systems. The CMP 200® DR X-ray generator adds a digital interface for digital radiography (DR) equipment. The CMP 200® X-ray generator consists of a main power cabinet and an optional membrane control console. The CMP 200® DR X-ray generator consists of a main power cabinet and an optional membrane, touchscreen, mini-console, or mini-console with a pre wired hand switch or a foot switch (used with digital interface). The main power cabinet contains the High Voltage Module and control circuits, the filament drivers, a low speed starter (optional dual-speed starter on some models of CMP 200® DR), and interface connections to the room equipment.
■The control console allows the operator to select the technique factors, image receptors, etc., and to initiate an X-ray exposure.
●Features
The following are the main features of and the options available for the generator:
▲Integral low speed starter, compatible with X-ray tubes with type “R” stator. Optional compatibility with GE 23/23 Ω equal impedance “E” stator
▲Optional dual-speed starter on some models of CMP 200® DR (not available on 1-phase units and 208/230 VAC 3 –phase units), compatible with tube types listed in the X-ray Tube Stator Compatiblity Tables supplement, part number 74602600
▲Capable of interfacing with various DR imaging systems (CMP 200® DR only)
▲24 VDC, 110, or 220 VAC power source for Buckys (fused at 0.8 amps)
▲24 VAC 150 watts power source for collimator lamp
▲24 VDC 45 watts power source for system locks
▲Optional AEC
▲Optional DAP (Dose-Area Product)
▲Optional 24VDC, 75 Watts, regulated, unswitched 2.5 Amp DIN Rail mounted power supply (intended for use with LED collimators)
▲Tomography
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2019/11/8 |
|
|
Rev.AF |
|
|
MAN901471 |
|
|
1003 KB |
- +1 Like
- Add to Favorites
Recommend
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
- Why Lifepo4 Battery as a Backup Power Supply for the Communications Industry?
- Efficient Power Conversion to Showcase how GaN is Transforming Power Delivery and Enabling Advanced Autonomy Across Multiple Industries at PCIM 2022
- Neoway‘s LTE Cat.M Module N27 Commercially Used in the Europe Power Market
- Neoway Smart Modules S720 and S726 Enable Smart Brains for Thousands of Industries
- IMS, a well-known brand in the global communications industry, signs an authorized agency distributor agreement with Sekorm
- Regarding Renesas‘s Acquisition of Stock of Celeno Communications Inc.
- New RA6M5 Group Delivers Extensive Communications Options, Generous On-chip Memory
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
