ATtiny1617/3217, tinyAVR® 1-series Preliminary Datasheet

2021-12-28
●Introduction
■The ATtiny1617/3217 are members of the tinyAVR® 1-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 20 MHz, with 16/32 KB Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a 24-pin package. The tinyAVR® 1-series uses the latest technologies with a flexible, low-power architecture including Event System and SleepWalking, accurate analog features, and Core Independent Peripherals. Capacitive touch interfaces with driven shield are supported with the integrated QTouch® peripheral touch controller.
●Features
■CPU
▲AVR® CPU
▲Running at up to 20 MHz
▲Single-cycle I/O access
▲Two-level interrupt controller
▲Two-cycle hardware multiplier
■Memories
▲32/16 KB In-system self-programmable Flash memory
▲256 bytes EEPROM
▲2 KB SRAM
▲Write/erase endurance:
◆Flash 10,000 cycles
◆EEPROM 100,000 cycles
▲Data retention:
◆40 years at 55°C
■System
▲Power-on Reset (POR)
▲Brown-out Detector (BOD)
▲Clock options:
◆16/20 MHz low-power internal RC oscillator
◆32.768 kHz Ultra Low-Power (ULP) internal RC oscillator
◆32.768 kHz external crystal oscillator
◆External clock input
▲Single-pin Unified Program and Debug Interface (UPDI)
▲Three sleep modes:
◆Idle with all peripherals running for immediate wake-up
◆Standby
▲Configurable operation of selected peripherals
▲SleepWalking peripherals
◆Power-Down with full data retention
■Peripherals
▲One 16-bit Timer/Counter type A (TCA) with dedicated period register and three comparechannels
▲Two 16-bit Timer/Counter type B (TCB) with input capture
▲One 12-bit Timer/Counter type D (TCD) optimized for control applications
▲One 16-bit Real-Time Counter (RTC) running from an external crystal, external clock, or internalRC oscillator
▲Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator
▲One USART with fractional baud rate generator, auto-baud, and start-of-frame detection
▲One master/slave Serial Peripheral Interface (SPI)
▲One Two-Wire Interface (TWI) with dual address match
◆Philips I²C compatible
◆Standard mode (Sm, 100 kHz)
◆Fast mode (Fm, 400 kHz)
◆Fast mode plus (Fm+, 1 MHz)
▲Three Analog Comparators (AC) with low propagation delay
▲Two 10-bit 115 ksps Analog-to-Digital Converters (ADC)
▲Three 8-bit Digital-to-Analog Converters (DAC) with one external channel
▲Multiple voltage references (VREF):
◆0.55V
◆1.1V
◆1.5V
◆2.5V
◆4.3V
▲Event System (EVSYS) for CPU independent and predictable inter-peripheral signaling
▲Configurable Custom Logic (CCL) with two programmable look-up tables
▲Automated CRC memory scan
▲Peripheral Touch Controller (PTC)
◆Capacitive touch buttons, sliders, wheels and 2D surfaces
◆Wake-up on touch
◆Driven shield for improved moisture and noise handling performance
◆Up to 14 self capacitance channels
◆Up to 49 mutual capacitance channels
▲External interrupt on all general purpose pins
■I/O and Packages:
▲22 programmable I/O lines
▲24-pin VQFN 4x4 mm
■Temperature Ranges:
▲-40°C to 105°C
▲-40°C to 125°C
■Speed Grades:
▲0-5 MHz @ 1.8V - 5.5V
▲0-10 MHz @ 2.7V - 5.5V
▲0-20 MHz @ 4.5V - 5.5V

MICROCHIP

ATtiny1617ATtiny3217tinyAVR® 1-series

More

Part#

microcontrollers

More

More

Datasheet

More

More

Please see the document for details

More

More

VQFN

English Chinese Chinese and English Japanese

07/2019

Rev. C

40001999C

3.6 MB

- The full preview is over. If you want to read the whole 627 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: