ATmega4808/4809 Data Sheet

2021-12-28
●Introduction
■The ATmega4808/4809 microcontrollers are part of the megaAVR® 0-series, which uses the AVR® processor with hardware multiplier running at up to 20 MHz, and offers a wide range of Flash sizes up to 48 KB, up to 6 KB of SRAM, and 256 bytes of EEPROM in 28-, 32-, 40-, or 48-pin packages. The series uses the latest technologies from Microchip with a flexible and low-power architecture, including Event System and SleepWalking, accurate analog features, and advanced peripherals.
■The devices described in this data sheet offer 48 KB in a 28/32/40/48-pin package.
●megaAVR® 0-series Overview
■The figure below shows the megaAVR® 0-series devices, laying out pin count variants and memory sizes:
▲Vertical migration is possible without code modification, as these devices are fully pin and feature compatible
▲Horizontal migration to the left reduces the pin count and, therefore, the available features
●Features
■AVR® CPU:
▲Single-cycle I/O access
▲Two-level interrupt controller
▲Two-cycle hardware multiplier
■Memories:
▲48 KB In-system self-programmable Flash memory
▲256B EEPROM
▲6 KB SRAM
▲Write/Erase endurance:
◆Flash 10,000 cycles
◆EEPROM 100,000 cycles
▲Data retention: 40 years at 55°C
■System:
▲Power-on Reset (POR) circuit
▲Brown-out Detector (BOD)
▲Clock options:
◆16/20 MHz low-power internal oscillator
◆32.768 kHz Ultra Low-Power (ULP) internal oscillator
◆32.768 kHz external crystal oscillator
◆External clock input
▲Single-pin Unified Program Debug Interface (UPDI)
▲Three sleep modes:
◆Idle with all peripherals running for immediate wake-up
◆Standby
▲Configurable operation of selected peripherals
▲SleepWalking peripherals
■Power-Down with limited wake-up functionality
■Peripherals:
▲One 16-bit Timer/Counter type A (TCA) with a dedicated period register and three compare channels
▲Up to four 16-bit Timer/Counters type B (TCB) with input capture
▲One 16-bit Real-Time Counter (RTC) running from an external crystal or an internal RC oscillator
▲Up to four USARTs with fractional baud rate generator, auto-baud, and start-of-frame detection
▲Master/slave Serial Peripheral Interface (SPI)
▲Master/slave TWI with dual address match
◆Can operate simultaneously as master and slave
◆Standard mode (Sm, 100 kHz)
◆Fast mode (Fm, 400 kHz)
◆Fast mode plus (Fm+, 1 MHz)
▲Event System for core independent and predictable inter-peripheral signaling
▲Configurable Custom Logic (CCL) with up to four programmable Look-up Tables (LUT)
▲One Analog Comparator (AC) with a scalable reference input
▲One 10-bit 150 ksps Analog-to-Digital Converter (ADC)
▲Five selectable internal voltage references: 0.55V, 1.1V, 1.5V, 2.5V, and 4.3V
▲CRC code memory scan hardware
◆Optional automatic CRC scan before code execution is allowed
▲Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator
▲External interrupt on all general purpose pin
■I/O and Packages:
▲Up to 41 programmable I/O lines
▲28-pin SSOP
▲32-pin VQFN 5x5 and TQFP 7x7
▲40-pin PDIP
▲48-pin UQFN 6x6 and TQFP 7x7
■Temperature Ranges:
▲Industrial: -40°C to +85°C
▲Extended: -40°C to +125°C
■Speed Grades -40°C to +105°C:
▲0-5 MHz @ 1.8V – 5.5V
▲0-10 MHz @ 2.7V – 5.5V
▲0-20 MHz @ 4.5V – 5.5V
■Speed Grades -40°C to +125°C:
▲0-8 MHz @ 2.7V - 5.5V
▲0-16 MHz @ 4.5V - 5.5V
■VAO variants available: Designed, manufactured, tested, and qualified in accordance with AEC-Q100requirements for automotive applications

MICROCHIP

ATmega4808ATmega4809megaAVR® 0-seriesATmega4809-MFR-VAOATmega808ATmega809ATmega1608ATmega1609ATmega3208ATmega3209

More

Part#

microcontrollers

More

automotive applications ]

More

Datasheet

More

More

Please see the document for details

More

More

SSOP;VQFN;TQFP;PDIP;UQFN

English Chinese Chinese and English Japanese

01/2020

Rev.A

DS40002173A

3.9 MB

- The full preview is over. If you want to read the whole 551 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: