NS-205/NS-205R Unmanaged 5-port Industrial 10/100 Mbps Ethernet Switch NS-105A/NS-205A Unmanaged 5-port Industrial 10/100 Mbps Ethernet Switch
●The NS-205/NS-205A/NS-105A has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M auto-negotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-205/NS-205A is just 33 mm, so it can be used where space is limited.
●The NS-205A/NS-105A provides +12 V-DC ~ +56/53 VDC power input to fi t various power source.
NS-205 、 NS-205R 、 NS-105A 、 NS-205A 、 NS-205 CR 、 NS-205R CR 、 NS-105A CR 、 NS-205A CR |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021.6 |
|
|
|
|
|
608 KB |
- +1 Like
- Add to Favorites
Recommend
- TDK Announces Worldwide Availability of a New Generation of MEMS Barometric Pressure Sensor Platform
- TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sensor to Achieve NextNav Certification
- TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
- Application of Sensors in Healthcare: Catheters
- PMICRO Launched PL51 Series Chips with ADC Function, Integrated Real EEPROM MCU and Built-in Single Cycle ET8051 Core
- In-depth Exploration of RF Connectors: A Comprehensive Overview
- CBM9001A Embedded USB Host Controller, Operating Full Speed at 12 Mbps with 256-byte Internal SRAM Buffer
- Low Capacitance 4-Line TVS Array SLVU2.8-8BTG is Suited for Use in 10/100/1000M Ethernet
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.