MV DAC-30 Test and diagnosis system for medium voltage cables
The MV DAC-30 is a DAC (Damped AC Voltage) test set with a peak voltage of 30 kV. The test set can be used for quality control on newly installed cables, in accordance with the IEEE 400.4 standard. In addition, to prevent unplanned outages, the unit can also be used for condition-monitoring purposes on aged cable circuits.
The main use of the DAC test set is to identify, evaluate and locate partial discharge (PD) faults in the insulation and accessories of all types of medium voltage power cables. PD activity is an indication of incipient insulation faults and is therefore widely regarded as one of the best ‘early warning’ indicators of deteriorating medium and high voltage insulation.
Partial discharges are regarded as the main breakdown cause for MV and HV cables. Performing offline PD measurements on MV and HV cables using a DAC voltage test set helps support the asset management process so that the correct decisions are made for future maintenance and re-placement activities.
Since the DAC frequency of the test voltage is close to nominal AC service conditions, all measured PD activities can be accurately evaluated and compared with the power frequency. The PD inception voltage (PDIV) and PD extinction volt-age (PDEV) can be easily determined due to the decaying amplitude of the test voltage.
The system consists of two parts: the control unit (including laptop), and the HV unit. The HV unit divides in two, making transport and set-up much easier. One of the unique features of the MV DAC-30 is that the HV unit consists of a voltage source with an internal PD detector. Unlike with other PD measurement systems, the cable under test is the only accessible live component when testing with the MV DAC-30, making it much safer.
The operating software guides the user through the entire process. Some key features are:
■Integrated cable database
■Fully automatic calibration
■Live PD mapping: evaluation and display of results during the actual measurement
■Reporting by mouse click
●FEATURES:
■Safe-to-touch, enclosed metallic casing
■Internal PD Detector
■"Live" evaluation and display of results
■Two part design for easy transportation
■Conforms to VDE safety standards
■High test capacity
MV DAC-30 、 1006132-S 、 2006817 、 2008839 、 2008840 、 90017826 、 90017827 |
|
Test and diagnosis system 、 DAC (Damped AC Voltage) test set |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/04/02 |
|
|
|
MVDAC30_DS_EN_V01 |
|
209 KB |
- +1 Like
- Add to Favorites
Recommend
- OpDAT MV Highly Flexible Distributor Housing from METZ CONNECT is Designed for Fiber Optic and Copper Applications
- Ultra Low Power LDO Designed for Low-Power Electronics and Battery Operated Systems | Diotec
- Nisshinbo Has Launched The New R5651 Series Protection IC for 3-to-5-cell Li-ion Batteries
- How to Use Your Digital Multimeter Effectively
- R5617 Series 1-cell Li-ion Battery Protection IC with Industry-leading High-accuracy Overcurrent/Overcharge Detections
- Nisshinbo‘s First 2-cell Li-ion Battery Protection Ic NB7200 Series with High Accuracy, Low Power Consumption, and Space-saving Design
- Dual-loop Digital Multi-phase Step-down Controller IS6201A Meets the Needs of Industry, Communication Applications, Supporting for LOAD LINE Function Setting
- Diotec‘s SK34SMA-3G-AQ Schottky Diode Offers Polarity Protection to Integrated Navigation Systems
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.