VLF CR-80 kV test system High-performance VLF test system for up to 46 and 66 kV rated cables
■This high-performance 0.1 Hz VLF test system for cables with cosine-rectangular Stages works in accordance with VDE, IEC and IEEE standards.
■According to most standards and regulations cable circuits must be tested after installation, after repair or for maintenance purposes. The VLF CR-80 kV test system can be used to test cables with 3 U-o with operating voltage levels up to 46 kV The system consists of a control unit and an HV unit. The high test capacity of 2.5 pF allows to simultaneously test all three phases with the standardized 0.1 Hz test frequency. Positive and negative DC testing of cables and connected switchgears can be carried out by switching over to DC Mode. Aside from cable and sheath testing, the system can also be used to precisely pinpoint sheath faults (in combination with a step voltage probe like the ESG NT).
■Using 0.1 Hz cosine-rectangular voltage, weak spots in the cable can be safely brought to break-down. The benefits of the VLF method with 0.1 Hz cosine-rectangular voltage have been confirmed by extensive scientific research as well as practical field tests. The proven voltage is recommended by Cenelec 620/621, IEC 60502-2 and IEEE 400.2 standard
■The VLF CR-80 kV test system can be used as stand-alone system (permanently installed in a transportation container for operations such as cable testing on offshore wind-farms) or fully integrated into a test and fault location system. The integrated safety system and breakdown recognition software maximise safety.
■Furthermore, the leakage current measurement enables a qualitative assessment of the cable cable, and the protocol function allows test data to be stored for further reporting purposes.
●FEATURES
■Ideal for testing long 36/45 kV submarine cables
■ High test capacity
■Maximises user safety through automatic discharge of the test object and earth loop monitoring
■Breakdown recognition
■VLF, DC and sheath fault pinpointing in one device
●Test with 3 Uo for 46 kV cables or 2 Uo for 66 kV cables
●Can function as a stand alone system or be integrated into the Centrix Test Van
●Ideal for standard compliance testing of long cables such as submarine cables
●Reporting, breakdown recognition and leakage current measurement
●Integrated discharge system
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/08/22 |
|
|
V02 |
|
|
|
|
|
360 KB |
- +1 Like
- Add to Favorites
Recommend
- Project completed - Iskra DZ9 Teleprotection equipment in operation at RTP 400/110 kV Cirkovce
- Demoboard: Protected Automotive USB Outlet - Safe Charging of your Smartphone in Caravans and More
- Diotec‘s ESD Protection Diode ESD9L1P8 for Auto-Preserving Cookers
- Diotec‘s ESD5Z3V3 Diode Offers ±30kV Surge Protection for Smart Watches Against ESD
- 3PEAK Becomes the First Chip Maker in China to Have Two Types of CAN Transceivers Passed German C＆S Compatibility Certification at the Same Time
- Intelligent Circuit Protection and Sensing Design for Smart Home Locks and Access Controls by littelfuse
- Littelfuse Unveils Latest eFuse Protection ICs LS05006VPQ33 for USB Type-C Port Protection
- Globally Leading ±15-kV IEC ESD Capability! 3PEAK‘s Full Family of Auto-Grade LIN Transceivers: TPT1021Q, TPT1022Q, and TPT1024Q
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
