74LV245 Octal bus transceiver; 3-state
■The 74LV245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess V-CC.
●Features and benefits：
■Wide supply voltage range from 1.0 V to 5.5 V
■CMOS low power dissipation
■Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
■Optimized for low voltage applications: 1.0 V to 3.6 V
■Accepts TTL input levels between V-CC = 2.7 V and V-CC = 3.6 V
■Typical output ground bounce < 0.8 V at V-CC = 3.3 V and T-amb = 25 °C
■Typical HIGH-level output voltage (V-OH) undershoot: > 2 V at V-CC = 3.3 V and T-amb = 25 °C
■Complies with JEDEC standards:
■JESD8-7 (1.65 V to 1.95 V)
■JESD8-5 (2.3 V to 2.7 V)
■JESD8C (2.7 V to 3.6 V)
■JESD36 (4.5 V to 5.5 V)
■ESD protection:
■HBM JESD22-A114E exceeds 2000 V
■MM JESD22-A115-A exceeds 200 V
■Specified from -40 °C to +85 °C and from -40 °C to +125 °C
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SO20;TSSOP20;SOT163-1;SOT360-1;075E04;MS-013;MO-153 |
|
|
English Chinese Chinese and English Japanese |
|
|
28 September 2021 |
|
|
Rev. 5 |
|
|
74LV245 v.5 |
|
|
237 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
