CH704 AEC-Q100 Qualified, 200A Hall Current Sensor IC with 4800V-RMS Reinforced Isolation
●The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. A precise, proportional voltage is provided by the low-offset, chopper-stabilized Hall IC, which is programmed for accuracy after packaging. The output of the device has a positive slope when an increasing current flow through the primary copper conduction path, which is the path used for current sensing.
●The terminals of the conductive path are electrically isolated from the sensor leads. This allows the CH704 current sensor IC to be used in high-side current sense applications without the use of high-side differential amplifiers or other costly isolation techniques.
●The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
■Features:
●Reinforced isolation: 4800V-RMS
●AEC-Q100 qualified(CH704A)
●Single supply: 4.5-5.5V
●Output voltage proportional to AC current:+/-50A,+/-100A,+/-150A,+/-200A
●Bandwidth: 120 kHz
●Response time: 4 us
●Wide temperature range: -40℃ to 150℃
●High resolution offset and sensitivity trimming with EEPROM
●Primary conductor resistance: 0.1mΩ
●Integrated protections
◆Under-voltage protection
◆Output voltage clamp provides short circuit diagnostic
◆Output spiking suppress during fast current step inputs
●Factory programmed sensitivity and quiescent output voltage TC
●Integrated digital temperature compensation circuitry
●Nearly zero magnetic hysteresis
●Ratio-metric output from supply voltage
●Immunity to external magnetic field
CH704 、 CH704A 、 CH704050CT 、 CH704100CT 、 CH704150CT 、 CH704200CT 、 CH704050ACT 、 CH704100ACT 、 CH704150ACT 、 CH704200ACT 、 CH7xx 、 CH704XXXXCT |
|
[ UPS current sensing ][ DC-to-DC converter control ][ Balance bike motor control ][ Overcurrent fault detection ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Oct 2021 |
|
Revision 1.0 |
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
- CH704 AEC-Q100 Qualified, 200A Hall Current Sensor IC with 4800VRMS Reinforced Isolation
- CH701W AEC-Q100 Qualified, 4800VRMS Isolation, Hall Current Sensor IC with Loss of Only 0.8mΩ
- The Cosemitech CHA44XP/CH44XP Hall-effect Sensor,extremely Temperature-stable and Stress-resistant Sensor ICs
- Melexis Unveils Automotive 200-2000A Current Sensors with Integrated Overcurrent Detection
- Crocus Current Sensors Offers Solar Inverters High Accuracy, High Bandwidth and Low Noise
- Melexis Launches the MLX91230 Current Sensors Which Brings 0.5% Accuracy in a Compact Design
- Melexis Introduces Next Generation of Isolated Integrated Current Sensors for Automotive Applications
- In 2022, Melexis’ Outperforming Product Lines Were Current Sensors, Embedded Drivers, Magnetic Position Sensors, and Temperature Sensors
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.